Questions: new to me YM2010

   / Questions: new to me YM2010 #1  

ufengineer

Bronze Member
Joined
Sep 27, 2015
Messages
54
Location
Jacksonville, florida
Tractor
ym2010
I noticed that the drivers side wheel bearing has some Play in it. If I grab the top of the wheel and push/pull there is a bit of play in the hub. Should I leave it or look to replace the bearing.

Also, the oil is very black and the transmission fluid looked new. I think the owner replaced the transmission fluid before advertising it because it was sludge like. I looked in the dip stick hole and saw remit sludge like oil. What should I do? Run it for a while then change the oil again.

Thank mike
 
   / Questions: new to me YM2010 #2  
There is a 6205 and a 6206 ball bearing in there. If everything is right there should be no play. If much I would repair before other damage is done. Yanmar Tractor Parts: 2WD AXLE

Would it be possible to ask the former owner if he cleaned the suction strainer when changing the transmission/hydraulic fluid?
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2007 Generac QT06030AVAN 60kVA LP Generator (A50322)
2007 Generac...
2024 Doosan DX140LCR Hydraulic Excavator (A50322)
2024 Doosan...
Killbros 260 Seed Conveyor (A52748)
Killbros 260 Seed...
CATERPILLAR D6R XL CRAWLER DOZER (A51406)
CATERPILLAR D6R XL...
John Deere 4455 (A50120)
John Deere 4455...
 
Top