Questions: new to me YM2010

   / Questions: new to me YM2010 #1  

ufengineer

Bronze Member
Joined
Sep 27, 2015
Messages
54
Location
Jacksonville, florida
Tractor
ym2010
I noticed that the drivers side wheel bearing has some Play in it. If I grab the top of the wheel and push/pull there is a bit of play in the hub. Should I leave it or look to replace the bearing.

Also, the oil is very black and the transmission fluid looked new. I think the owner replaced the transmission fluid before advertising it because it was sludge like. I looked in the dip stick hole and saw remit sludge like oil. What should I do? Run it for a while then change the oil again.

Thank mike
 
   / Questions: new to me YM2010 #2  
There is a 6205 and a 6206 ball bearing in there. If everything is right there should be no play. If much I would repair before other damage is done. Yanmar Tractor Parts: 2WD AXLE

Would it be possible to ask the former owner if he cleaned the suction strainer when changing the transmission/hydraulic fluid?
 

Tractor & Equipment Auctions

2008 GMC C7500 Altec LRV55 55ft Forestry Chipper Bucket Truck (A50323)
2008 GMC C7500...
1999 Mack CH613 (A50120)
1999 Mack CH613...
2019 Chevrolet Tahoe SUV (A50324)
2019 Chevrolet...
2018 Dodge Charger Sedan (A50324)
2018 Dodge Charger...
2012 International ProStar Sleeper Cab Truck Tractor (A51692)
2012 International...
2013 Peterbilt T/A Heil 28Yd Side Loader Garbage Truck (A50323)
2013 Peterbilt T/A...
 
Top