Questions: new to me YM2010

   / Questions: new to me YM2010 #1  

ufengineer

Bronze Member
Joined
Sep 27, 2015
Messages
54
Location
Jacksonville, florida
Tractor
ym2010
I noticed that the drivers side wheel bearing has some Play in it. If I grab the top of the wheel and push/pull there is a bit of play in the hub. Should I leave it or look to replace the bearing.

Also, the oil is very black and the transmission fluid looked new. I think the owner replaced the transmission fluid before advertising it because it was sludge like. I looked in the dip stick hole and saw remit sludge like oil. What should I do? Run it for a while then change the oil again.

Thank mike
 
   / Questions: new to me YM2010 #2  
There is a 6205 and a 6206 ball bearing in there. If everything is right there should be no play. If much I would repair before other damage is done. Yanmar Tractor Parts: 2WD AXLE

Would it be possible to ask the former owner if he cleaned the suction strainer when changing the transmission/hydraulic fluid?
 

Tractor & Equipment Auctions

2015 KENWORTH T680 TANDEM AXLE SLEEPER (A52577)
2015 KENWORTH T680...
2002 International 4300 Truck, VIN # 1HTMMAAN92H547720 (A51572)
2002 International...
NEW Wolverine Skid Steer Drive and Augers (A53002)
NEW Wolverine Skid...
Krone Swadro 46T (A50120)
Krone Swadro 46T...
2016 Isuzu NPR-HD 24ft Box Truck (A50323)
2016 Isuzu NPR-HD...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top