Question about electrical connector on DK 40SE

[JohninCT]

I am a new owner of a DK 40SE. There is an unused/unconnected electrical connector at the left rear of the tractor. Can someone tell me what this connector is used for?

 

[DEON]

I am a new owner of a DK 40SE. There is an unused/unconnected electrical connector at the left rear of the tractor. Can someone tell me what this connector is used for?

No one has answered you yet. I don't actually know what it is but my dealer told me it was for trailer lights. Not sure if that is correct.

 

[Coyote machine]

It is probably the 'owner use circuit'. Check your fusebox for an extra fuse marked 'customer use'. Run a test light to ground and see if it is a live circuit when the tractor is running; it may be controlled by a switch near the 'console' - check owner's manual for location of switch. Pull associated fuse to verify the particular circuit/fuse, and see if test light goes dead.

 

[northcreek2624]

I thought that it might be for cab lighting if you were to opt for a hard cab....Mike.

 

[DEON]

I thought that it might be for cab lighting if you were to opt for a hard cab....Mike.

There is also one of those connectors on the CK models and there is no cab options for CKs. Email Wallace Equipment, he will know.

 

[JohninCT]

Thanks for the replies. I'll have to look at it a little closer and check it out with a test light.

 

[8404]

mine has a round plug with more than two wires, Its for trailer lights "left right rurn signals, electric brakes, run lights.

 

[elstonb]

Deon, Have you found out what that connector is for? I also have the same Kioti.

THANKS,
elstonb NH.

 

[wallace]

If it is on the rear of the tractor usually on the passanger side it is for a optional rear work light.