Putting a Meyer's power angle on a Ford NAA

   / Putting a Meyer's power angle on a Ford NAA #11  
I can't take credit for it. I've seen it used for a front scrape blade, and a small nose lift for a trailer on other antique ford tractors with 3pt lift.. but not much ability for external hyds..

soundguy
 
   / Putting a Meyer's power angle on a Ford NAA #12  
I assume you coud fill one cyl via hyds thru the hose, fill the other and expel a bit, and then union the hoses with a 3-way female pipe T and add make up oil, then plug..

soundguy

Have you actually done this trick? :)
 
   / Putting a Meyer's power angle on a Ford NAA #14  
I have done something similar while dinking with loader hyds on a couple of my machines where I had limited external hyds capability.. I was actually using the 3pt for one cyl, and a rigged remote for another... finally got a different setup and laid it to rest.. :)

soundguy
 
   / Putting a Meyer's power angle on a Ford NAA #15  
I'm going to try Soundguy's idea. I have two cylinders unused from a woodsplitter project. They were too small for that but will work fine for this. Now I just need to mount the Meyers on the front of my tractor. didn't want to cut into any of the truck mounting brackets as then i can't sell it for that use.
 
   / Putting a Meyer's power angle on a Ford NAA #16  
if they are da cyls, just put a breather plug in the unused port but not a sealed plug...
 

Tractor & Equipment Auctions

2021 Delta Redirective Crash Cushion 75000 (A51692)
2021 Delta...
2025 New/Unused Wolverine Pallet Fork Extensions (A51573)
2025 New/Unused...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Intermodel Metal Storage Crate (A51573)
Intermodel Metal...
2018 INTERNATIONAL 4400 4X2 EXT CAB SERVICE TRUCK (A51406)
2018 INTERNATIONAL...
NEW Wolverine 72'' Skid Steer Sickle Bar Mower (A53002)
NEW Wolverine 72''...
 
Top