Putting a Meyer's power angle on a Ford NAA

   / Putting a Meyer's power angle on a Ford NAA #11  
I can't take credit for it. I've seen it used for a front scrape blade, and a small nose lift for a trailer on other antique ford tractors with 3pt lift.. but not much ability for external hyds..

soundguy
 
   / Putting a Meyer's power angle on a Ford NAA #12  
I assume you coud fill one cyl via hyds thru the hose, fill the other and expel a bit, and then union the hoses with a 3-way female pipe T and add make up oil, then plug..

soundguy

Have you actually done this trick? :)
 
   / Putting a Meyer's power angle on a Ford NAA #14  
I have done something similar while dinking with loader hyds on a couple of my machines where I had limited external hyds capability.. I was actually using the 3pt for one cyl, and a rigged remote for another... finally got a different setup and laid it to rest.. :)

soundguy
 
   / Putting a Meyer's power angle on a Ford NAA #15  
I'm going to try Soundguy's idea. I have two cylinders unused from a woodsplitter project. They were too small for that but will work fine for this. Now I just need to mount the Meyers on the front of my tractor. didn't want to cut into any of the truck mounting brackets as then i can't sell it for that use.
 
   / Putting a Meyer's power angle on a Ford NAA #16  
if they are da cyls, just put a breather plug in the unused port but not a sealed plug...
 

Tractor & Equipment Auctions

3 POINT  7FT RAKE (A52472)
3 POINT 7FT RAKE...
toro turf sweeper (A50324)
toro turf sweeper...
2016 HINO 268 26FT BOX TRUCK (A52141)
2016 HINO 268 26FT...
(1) 12ft Tarter Gate (A51573)
(1) 12ft Tarter...
BUSH WACKER ST-180 ELITE BATWING ROTARY MOWER (A51406)
BUSH WACKER ST-180...
New Wolverine Skid Steer Hydraulic Breaker (A53002)
New Wolverine Skid...
 
Top