pto tubing problem

   / pto tubing problem
  • Thread Starter
#11  
there are usually plastic pins that push in to hold the round cone end that covers the U joint onto the tube. usually the chains are hooked to the cone and both sections of shield should have chains that keep them from rotating. are you missing a chain so that one tube is fixed and the other rotating?
There are chains to both cones. One cone has the shield well attached, the other end, the shield (tube) keeps popping out of the cone. There are no chains to the shields (tubes).
 
   / pto tubing problem #12  
I threw the one's that I had in the trash

willy
 
   / pto tubing problem
  • Thread Starter
#13  
For those with a similar problem...

It looks like I was able to fix it with a zip tie (I ran the stump grinder for 2+ hours and it held up fine -- that's WAY longer than what I had tried previously).
 

Attachments

  • PXL_20241107_224950794.jpg
    PXL_20241107_224950794.jpg
    1.6 MB · Views: 56

Tractor & Equipment Auctions

2014 MACK ELITE LEU613 GARBAGE TRUCK (A51243)
2014 MACK ELITE...
KODIAK 10' HD ROTARY MOWER (A51406)
KODIAK 10' HD...
2017 Chevrolet Silverado 1500 Crew Cab Pickup Truck (A50323)
2017 Chevrolet...
2001 GMC W4 CRANE TRUCK (A51222)
2001 GMC W4 CRANE...
2020 INTERNATIONAL LT625 TANDEM AXLE SLEEPER TRUCK (A51222)
2020 INTERNATIONAL...
3HP Electric Fans (A50854)
3HP Electric Fans...
 
Top