PTO speed

[midcarolina]

Hello,

I searched but could not find the answer,

I have a YMG2000D it has a three speed selector for the PTO does anyone happen to know what speeds 1,2,3 are?

Thanks

 

[oldhippy]

The bottom lever position on PTO is 540. The middle is 1000 I think. Top I don't know. These are at around 2400 rpm. I don't have anything that I use that takes other than the 540. I am sure someone can come up with the other speed, if not I will be useing the tractor thursday and friday and will look at speed then. Hope this helps. big dan

 

[midcarolina]

Oh man............ that means I have been running my rotary cuttery way fast

Thanks for the info

 

[1danny]

Hello,

I searched but could not find the answer,

I have a YMG2000D it has a three speed selector for the PTO does anyone happen to know what speeds 1,2,3 are?

Thanks

#1 588
#2 730
#3 1260

Danny

 

[Mickey_Fx]

A lot of the Yanmars are set up with pto speeds of 540, 1000, and engine speed.

Some of the newer models have 4 speed pto's.

Looking in my manual it shows for all the models listed, that pto speed is @ 2200 rpm.

 

[1danny]

Hello,

I searched but could not find the answer,

I have a YMG2000D it has a three speed selector for the PTO does anyone happen to know what speeds 1,2,3 are?

Thanks[/QUOTE

Sorry, I didn't see the G in the YMG. Here are the correct speeds.

#1 550
#2 784
#3 1096

Danny

 

[midcarolina]

Thanks for all the input..... Needless to say I have been running some awsome blade tip speeds

 

[oldhippy]

Sure does cut the grass quicker. LOL

 

[Eddie]

My 2020 has 4 speed PTO. I use it on 2 for the 2nd pass on tiller to pulverize the dirt.

 

[Mickey_Fx]

My 2020 has 4 speed PTO. I use it on 2 for the 2nd pass on tiller to pulverize the dirt.

Same here. Love the way the higher speed along with tine design leave the garden plot worked up.

Here are a couple recent pics, the second is after 2nd pass.

 

[CivEngSC]

Ok, now I am confused - I have a 2310D w/ 4 speed PTO. Sitting in the seat, the labelling has #1 up and to the right, but it sounds like down and to the left is a slower speed. Can anyone tell me if I am deaf or hopefully the labels are backwards. Speeds at various levels would be appreciated.

 

[EFC]

Some of the newer models have 4 speed pto's.

Most of the newer models have 6 speeds and a reverse option in one or all the speeds.

Buck

 

[Mickey_Fx]

Ok, now I am confused - I have a 2310D w/ 4 speed PTO. Sitting in the seat, the labelling has #1 up and to the right, but it sounds like down and to the left is a slower speed. Can anyone tell me if I am deaf or hopefully the labels are backwards. Speeds at various levels would be appreciated.

On my model, #1 pto right and up. #2 is right and down.

According to my manual:
#1 = 540@2200
#2 = 1000@2200
#3 = engine speed
#4 = 2500@2200

 

[Tom_Veatch]

Ok, now I am confused - I have a 2310D w/ 4 speed PTO. Sitting in the seat, the labelling has #1 up and to the right, but it sounds like down and to the left is a slower speed. Can anyone tell me if I am deaf or hopefully the labels are backwards. Speeds at various levels would be appreciated.

On mine (YM2220D) #1 is left and up. Think #2 is left and down, but I've never used anything but #1 so I'm not sure enough about #3 and #4 to say which is up and which is down. PTO speeds are like Mickey said except my engine speed may be a little higher.

 

[1danny]

On my model, #1 pto right and up. #2 is right and down.

According to my manual:
#1 = 540@2200
#2 = 1000@2200
#3 = engine speed
#4 = 2500@2200

Mickey, the FX24D should be like this.

#1 574
#2 699
#3 958
#4 1293

Danny

 

[Mickey_Fx]

Any reason why my manual should report differently? It's not a great manual by any stretch but why so far off for something so straight foreward?

 

[1danny]

Any reason why my manual should report differently? It's not a great manual by any stretch but why so far off for something so straight foreward?

Don't know, but 2500 is a lot of RPM's

Danny

 

[blackd]

Mickey, doesn't your FX-24 have a PTO speed indicator on the tach? Mine shows engine speed on top and the four PTO speeds on bottom. Neat feature!

 

[Tom_Veatch]

Well, with the numbers being thrown around, I went and checked my manual, "Yanmar Diesel Tractor Operation Manual, Yanmar '20 Series", MC#YM20-A, Murray Publishing, and it pretty much echos Micky's numbers:

"4 Speed, trans. driven 540 @ 2200, 1000 @ 2200, Engine Speed (appx), Slightly Overdrive".

I assume the numbers are, respectively, for #1, #2, #3, and #4.

 

[HoyeTractor]

Any reason why my manual should report differently?

Danny,
I'm not doubting your info at all but I'm curious where you got those speeds? When we were doing research for those manuals we found a Japanese Yanmar publication that had the other speeds listed. I guess the original book could have had a misprint- we found several conflicts when researching & this could be just another one.

Aaron
Parts@HoyeTractor.com
(940)592-0181