PTO rotation

   / PTO rotation #1  

hagrant

Member
Joined
Feb 28, 2015
Messages
45
Location
Woodstock, NB Canada
Tractor
454 foton
Is it normal for the PTO stub to rotate slightly without being physically engaged? I notice it is turning very slowly and it is not engaged.
 
   / PTO rotation #2  
In some transmissions the fluid flow can cause the shaft to rotate.
Depends on your machine. I am not familiar with your machine. Is it clutch operated or HST?

The test would be to use a piece of scrap wood and see if it stops easily or keep turning. If it stops no problem. If it keeps turning check linkages and see if it is partially engaged.
 
   / PTO rotation
  • Thread Starter
#3  
its clutch operated. I will try the piece of scrap wood thing. Thanks
 
   / PTO rotation
  • Thread Starter
#4  
I just tried it and it stops when i put a small amount of pressure on it so it must be just the fluid flow. Thanks!
 

Tractor & Equipment Auctions

2023 New Holland CR10.90 Combine - 332 Engine Hours - 244 Separator Hours (A51039)
2023 New Holland...
3in Poly Pipe (A49461)
3in Poly Pipe (A49461)
2018 FORD EXPEDITION (A51406)
2018 FORD...
EVERYTHING SOLD AS-IS WHERE IS!! (A50774)
EVERYTHING SOLD...
2014 Ford F-150 Pickup Truck (A49461)
2014 Ford F-150...
2000 John Deere 1860, 30ft Wide, Gandy Box, Wing Fold, 7.5in Spacing (A51039)
2000 John Deere...
 
Top