Pros and Cons of Kioti

[PA hayseed]

Not sure how well it will go over putting red equipment on the orange page. Did go with JD, their paint is just too much $$$. Went with a Yanmar YT359.

View attachment 556506View attachment 556507View attachment 556508

l have had a DK45hstse for awhile, has around 1000 hours, I've had some issues with it. I am looking to get a cab tractor and I too have been looking at that Yanmar. It is kinda pricey but that cab has like every bell and whistle with heat and air. It didn't come with a hot chick handing out beer though. I think my wife would object to that option. THe loader on the next lower model has more lift capacity than my 45, which is somehting that I am looking at.

 

[Looking4new]

prof fate, the reason I asked is because if you are over 6'2" you will have a tendency to hit the top of your head on the mirrors.
My CK27 DEMANDS that I plug it in at temps lower than zero.

 

[airbiscuit]

prof fate, the reason I asked is because if you are over 6'2" you will have a tendency to hit the top of your head on the mirrors.
My CK27 DEMANDS that I plug it in at temps lower than zero.

I don't know about demands, but if you love your diesel, you plug it in when it gets below 10 or 20 degrees. A $25 block heater is a good investment.

 

[HK45]

Hey coobie, I don't have the pictures anymore but here's the receipt. Not sure why you would think somebody would lie or make something up like that. Hopefully this ease your mind. Also I sent over pictures of the latest issue with the fan chewing its self apart

 

[HK45]

Sorry i guess I did lie the bill was $875 not $1000

 

[coobie]

Hey coobie, I don't have the pictures anymore but here's the receipt. Not sure why you would think somebody would lie or make something up like that. Hopefully this ease your mind. Also I sent over pictures of the latest issue with the fan chewing its self apartView attachment 556640View attachment 556641 View attachment 556640

I never stated you lied,those are your words.I requested pics of the loader.If you are unhappy with your Kioti tractor sell it and move on.

 

[coobie]

I think they are junk and no dealer support. I have a nx6010. As we speak its at the dealer for a cab leak and issues with the backhoe. Like always the dealer says they soaked the machine and no leak. I have video of it leaking. Before that both lower front hydraulic cylinder that control the bucket snapped. Both shafts snapped and bucket came crashing down, hydraulic fluid everywhere. The loader was out of warranty and I called and complained but they did nothing and the dealer didn't do anything. Funny thing was they said they never seen that before. List goes on and on. If I would have to do it again I would get a John deer. I think it's a better machine and dealer support is there. Sometimes it just not worth saving a few thousand vs getting a John deer or kobuta

A follow up of your statement.If you think John deere or Kubota tractors are flawless think again.Research is your friend.

 

[Coyote machine]

Jumping in at the tail end here...
To the OP- the expression goes, to my recollection: "If you have to ask, you can't afford it". I first learned that on at my friend's Boatyard/docks in CT, back in the '60's.
I find that if I make the mistake of asking or going to see what I want 'live', I usually, sometimes against my better judgement, decide I'll find a way to make whatever it is, affordable. Wife sighing and shaking head in background! :confused3:

To the poster HK45's comments about Kioti being 'junk'. That is categorically WRONG, and even more so inaccurate. To HK45; it sounds to me from your comments you have a dealer service issue, not a 'junk' tractor. I can testify to Kioti's willingness to help owner's of their equipment, especially their tractor both during and after warranty.
I will say that their dealer network availability in most parts of the US is expanding, and though not as big as some other tractor manufacturers, it is possible to have crappy dealer service from any color tractor brand.
As Coobie stated- if you do some research here and elsewhere you will find what he and I have stated to be true.
I suggest if you want to get the Kioti guys to help you post a new thread and detail your issues and the Pak will respond, including me, to get you satisfactory resolution(s).
Hijacking this thread to get further help is best avoided, which is why I suggest a thread in Kioti owning forum dedicated to just your machine. Let's get it fixed- it's not rocket science- everything is repairable.

 

[HK45]

I did not hijack a thread. I answered the posters question. Then I had two member try to make it seem like I was lying about my problems. Second, I have contacted kioti a few times and they are unwilling to help period. You are right about the dealer but wrong on kioti willingness to help. People that are getting help are getting it from the dealer and they are paying for stuff out of there pocket not kioti. You ask how I know this because when I called kioti about some of the issues they told me at that time I only had two claims for warranty, I said how is that since I had it repaired 10 time already.

 

[HK45]

Anyways I want to apologize to the original poster if you felt like I high jacket your thread. I was being honest in what I said and how I feel about my machine.