Pressure Gauge Question
- Thread starter NCMau
- Start date
- Views: 1168
kennyd
Advertiser
That would be the perfect place for it. Be sure to use a Tee rated for the pressure (and not a cast iron plumbing one from Home Cheapot) and gauge rated for 3k or 5k PSI.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
liquid filled gauge too!
Zebrafive
Super Member
As kennyd says get 3-5K psi guage. It is said a guage is most accurate in the center of it's range, hence if you expect 2500psi get a 5Kpsi guage. On the other hand the graduation will be further apart on a 3Kpsi gauge than a 5Kpsi guage so it might be easier to read. Either will work.
Thank you guys. I am totally redoing the loader hydraulic and I am surely going to have more questions in the near future. One that comes to mind is the drainage of the external tank (located behind the seat). Although not absolutely necessary, I am thinking it maybe important to have one to avoid uncoupling the lines for fluid drainage purpose. Maybe T the return port of the tank?
