Prairie Chicken
- Thread starter DeeDubya
- Start date
- Views: 1467
tcreeley
Elite Member
Imagine being squished like that- poor chicken!
eventer79
Bronze Member
ROFL -- I opened this thread because I actually used to work with endangered Attwater's Prairie Chickens and I thought "NO WAY!" Was not expecting that!!
texasjohn
Super Member
I think you should cut a slice, polish it up and mount it for posterity.
That actually sounds pretty cool. :thumbsup:
brin
Super Member
You could cut a slice and put it on ebay...for auction...no telling what image folks would see and buy....
Threepoint
Veteran Member
- Joined
- Feb 13, 2014
- Messages
- 2,245
- Location
- No. VA
- Tractor
- Kubota B2150HST w/ LA350 loader, Kubota GF1800 HST, Kioti CK3510SE HST w/ KL4030 loader, Kioti NX4510HST/cab w/ KL6010 loader
What a hoot! I'd sure try to put that to use some way, other than in the fireplace! Can't tell the diameter from the pic, but if you coat it with AnchorSeal and let it dry very slowly, you might be able to make a small trivet or cheeseboard out of it.
OP
DeeDubya
Silver Member
What a hoot! I'd sure try to put that to use some way, other than in the fireplace! Can't tell the diameter from the pic, but if you coat it with AnchorSeal and let it dry very slowly, you might be able to make a small trivet or cheeseboard out of it.
It was roughly a 12" green tree. I took this pic the same day I cut it. This thin slice had already dried enough to crack by the next day. The spalting actually runs several feet within the tree. You would have to cut a large piece and let it dry slowly and then slice it after it dried. Also, the spalted (rotted) part is soft and would not be very good for a cheese board. I have better things to do but couldn't resist this one. There are other trees with unusual spalting like pecan but for the most part they are all soft woods. A really nice hardwood with a beautiful burl is much more impressive and you can actually make something out of it. Like a stock for your 300 win mag!
