Power steering lines ford 445

[Markhodges78]

I am the new owner of a ford 445 backhoe when I bought it the steering didn稚 work after filling with fluid I found that the line down by the crank shaft has holes in it I have removed the lines and found that the hole in right at the bend so I am going to have to replace the line but I can not find the lines anywhere does anyone have any clue where I might locate these lines are maybe part numbers for them


Thanks in advance
Mark

 

[joecdeere]

Mark, they made a plain 445, 445A, 445C, and a 445D, which one do you have and we can help you more
If you're not sure, post us the info on the tag under the hood, or off the flat boss above and to the rear of the starter (stamped in, not cast )

445 & 445A steering lines - New Holland (445) - 3 CYL UTILITY TRACTOR (1/78-5/85) Parts Diagrams

if you have the "C" or "D" we need to know 2 or 4 wheel drive and if 4WD axle info too

 

[Markhodges78]

I have the 445

 

[joecdeere]

see your needed line in the drawing? sadly most if not all the lines will have to come from NH

 

[Markhodges78]

Yes I believe it’s the 12 & 13

 

[Markhodges78]

Thanks so much

 

[Markhodges78]

Ok next? Not sure what this means I know we have OD and length but not sure on the x240

HYD TUBE,9.53 mm OD x 240, 172.5 mm L
12 HYD TUBE,9.53 mm OD x 285, 191.5 mm L
13 HYD TUBE,9.53 mm OD x 203.5, 136.5 mm L
13 HYD TUBE,9.53 mm OD x 360, 136.5 mm L

 

[extractr]

I am the new owner of a ford 445 backhoe when I bought it the steering didn稚 work after filling with fluid I found that the line down by the crank shaft has holes in it I have removed the lines and found that the hole in right at the bend so I am going to have to replace the line but I can not find the lines anywhere does anyone have any clue where I might locate these lines are maybe part numbers for them


Thanks in advance
Mark

Check with New Holland/Ford, they have a parts manual but you have to do some looking to find it, they dont make it easy. Look for the tab search by model.