Power Steering for L245DT

[kenan]

KUBOTA L245DT
Does anyone have any information on extending the splined shaft on the front of the motor? I would like to extend the shaft and mount a pump on the metal bracket in front of the shaft. The shaft measures 1.0 inches in Diameter. I need to extend about 10 inches. All information is greatly appreciated!

Kenan

 

[fbson395]

Kenan, You moght check with a dealer or even ebay. Their is a coupling that connects the crank to the pump, it fits on the splined shaft and has a flexable extension.
Bill

 

[South42]

Have the same tractor. My hydraulics run from the pump on the side of engine to the 3PH. On the 3ph, there is a small manifold block that feeds the FEL control valve. Question: Could I install a tee fitting to the FEL Valve supply line coming from this manifold and plumb the priority valve from there?