power for quick attach system

ironman1952 · Dec 18, 2023

I have looked high and low on this subject and cant find anything. My Kioti RX7320 has the quick attach loader. I am wondering if there is an aftermarket conversion to have the pins lock via hydraulic or electric motors. I know they make these for the new skid steers and such. I may be calling it by the wrong name in my search.
HELP

nyone · Dec 18, 2023

Theres a thread on here where a fellow used a linear actuator to lock the SSQA levers.

kennyd · Dec 18, 2023

I've seen a few custom builds, but no 'kit' for them.

Automating the Quick Attach (SSQA)

No claims for originality here. I have seen others do it but I decided to 'do it my way'. The thought was it would be a nice simple project to execute. Turned out there were little procurement bumps in the road that kept pushing back the finish date. So the plan was to utilize a 200mm linear...

www.tractorbynet.com

ironman1952 · Dec 18, 2023

Thank you

I did find one on Good Works Tractor's website made by HLA
Pretty spendy though 2950.00 I believe and then the hoses, coupler multiplier about 620 or so for the 4 gang one.
In the end Its probably about 4k If i pay myself 20 every time I switch attachments thats 200 times thats the ROI

I think I need a rock bucket more

jmc · Dec 18, 2023

nyone said:
Theres a thread on here where a fellow used a linear actuator to lock the SSQA levers.

Fallon did one 10 or 15 years ago.

Fallon · Dec 18, 2023

jmc said:
Fallon did one 10 or 15 years ago.

And Fallon has half a hydraulic one now. Plumbing & valves installed. But putting in the cylinder building brackets is probably a spring thing. Less work to do an electric one. Remains to be seen if hydraulics are worth the extra effort over a linear actuator.

Linear actuator for power SSQA?

I've been getting kind of lazy swapping between pallet forks & my bucket. This has resulted in me dropping the forks once or twice because I forgot to latch down the SSQA levers. Doing a setup like Power Bob-Tach Bob-Tach Attachment Mounting System - Bobcat Company would be pretty cool. I...

www.tractorbynet.com

Where to mount a crossover relief, diverter & 3rd function QCs on a loader?

I've had a 3rd function on my loader since new. I had a linear actuator power SSQA on my old machine (Linear actuator for power SSQA?) & am hopefully going to get around to putting a hydraulic one on my L4060hstc finally. I blew a hose on my hydraulic SSQA post hole digger a little while back...

www.tractorbynet.com