I replaced the seat on my B2710 with a Northern Tool seat and it was a huge improvement. I think this is the same seat, or at least pretty close. I've had mine for about 10 years. It did require a bit of fabrication to get the bolt holes to work, I used slotted angle. It also doesn't tip forward, something I really miss because it had that little tool box under the seat that I can't use anymore. That also complicates using the PTO without being in the seat, like if you want to use a log splitter. I modified mine so the engine will still die if I'm not in the seat, but I left a little pigtail that I can use to jumper the safety out, so I can get out of the seat and the engine and PTO will work.
Possible way to stop sliding-slipping down in Kubota "B" seat.
- Thread starter sixdogs
- Start date
- Views: 12949
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
Maybe a solution for this, will also help the most annoying problem of sliding off my bed when I adjust the head end, up somwhat! lol
DieselBound
Elite Member
Looks like they do:
https://www.northerntool.com/shop/tools/product_200490177_200490177
I don't recall having to do any modifications. But, I seem to recall cussing a bit. So, if they're still the same, yes, the holes line up (but one has to play around a bit).
Pretty sure that you'll be happy with this seat. It's nothing special other than it just works (and it's cheap). The drain holes are a plus.
Short term wear your seat belt.
Long term Cure for sucky Kubota seats
Long term Cure for sucky Kubota seats
Comfortable Tractor Seat Options - GRAMMER
At Grammer, we understand the countless hours farmers spend in close contact with their tractor seats. As a result, we have spent years perfecting our seats, which provide air ride suspension for tractors and other agricultural equipment, helping alleviate back pain while providing maximum comfort.
usa.grammer.com
I was going to suggest lag screws butt I think Velcro is a better choice
OP
sixdogs
Super Star Member
- Joined
- Dec 8, 2007
- Messages
- 13,827
- Location
- Ohio
- Tractor
- Kubota M7040, Kubota MX5100, Deere 790 TLB, Farmall Super C
Thank you. Having it fit on a B7800, like mine, makes it better. For a tractor that's primarily a lawnmower, it will be just fine. Cussing during installation is OK.
Beezfun--great seat but more than I want to spend on a mower. Tractor, yes. Thank you.
Mikester--Grammer is no doubt the best. I have a cab tractor with one and a Grasshopper as well and both are as good as it gets. Thank you.
Last edited:
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,550
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Hmmm?? All the suggestions for seat covers, and not a single pic...
Until this thread, never heard of or thought of sliding off a seat. Just doesn't happen.
Until this thread, never heard of or thought of sliding off a seat. Just doesn't happen.
I tried posting a pic of one but it kept falling off...
oosik
Epic Contributor
I've never had enough of a "slipping" situation to really call it a problem. I was given a foam "seat warmer". Just lay it down on the seat and sit on it. Kind of nice on really cold days - my M6040 is open station.
I DID notice - when I use this chunk of foam - there is absolutely no slipping, anywhere, what so ever.
Could be a quick, cheap answer. www.therm-a-seat.com Made in the USA. Lawrence, MA. It's what they call their fishing cushion. $9.99.
I DID notice - when I use this chunk of foam - there is absolutely no slipping, anywhere, what so ever.
Could be a quick, cheap answer. www.therm-a-seat.com Made in the USA. Lawrence, MA. It's what they call their fishing cushion. $9.99.
Smokeydog
Elite Member
2013 M59 seat vinyl was starting to crack along the top cushion.
Durafit seat cover from Amazon. KU05 KNT C
Durafit Seat Covers, KU05 SST for KUBOTA Tractors L45/M45.L48/M59.B25/B26 M108S LP MOWERS F2680/F2880/F3080/F3680 in SST Camo Endura Amazon.com: Durafit Seat Covers, KU05 SST for KUBOTA Tractors L45/M45.L48/M59.B25/B26 M108S LP MOWERS F2680/F2880/F3080/F3680 in SST Camo Endura: Automotive
Good fit, quality straps and Velcro to hold in place. Little more friction than the vinyl.
