Piranah bar kicks arse.....

[shooterdon]

What have you found to be yur limit?

About 4” poplars. Still learning though.

 

[Mtnmnstr]

It's been 4 weeks and still no bar shipped. Customer service fone is not answering.

 

[eubie5]

Maybe I'm not doing things right, but I'm not able to clear underbrush like you all are. It just seems to push things over, but not tear anything out. It does seem to work better if I have some heavy ballast on the back. I have a bx2380, with r4 tires.
I am new to the fel, my old Kubota didn't have one.
Any tips?

 

[eubie5]

Op,
The underbrush i have is exactly like what you have in your 4th pic.

 

[eubie5]

It's been 4 weeks and still no bar shipped. Customer service fone is not answering.

I've had mine for a couple months. Was quoted about a week when i paid them, took almost 5 weeks.
It's absolutely worth it.

 

[RoyKing]

worth the wait

 

[RSKY]

Maybe I'm not doing things right, but I'm not able to clear underbrush like you all are. It just seems to push things over, but not tear anything out. It does seem to work better if I have some heavy ballast on the back. I have a bx2380, with r4 tires.
I am new to the fel, my old Kubota didn't have one.
Any tips?

First job with the Piranha I cleaned about 80' of blackberry vines with some small trees grown up in the middle. There is a definite learning process. I managed go get one 4" diameter maple up by digging in from all four sides and then backing up a couple feet and ramming under the tree. Then wiggle the front of the bucket with the curl. Took a few minutes but finally tore the tap root and up it came. The vines were removed by scooping an inch or two under ground and doing the same wiggle. The job took two days and I did twice the work in half the time the second day after I learned a little.

RSKY

 

[3gunr]

I can catch and pull out 4 inch osage trees no problem, The honey locust is a different story , have to dig them out. Last week i pushed over a 10 inch pine and popped the root ball right out with the pirrahna. love it.

 

[kjg26]

I've got a 55hp utility tractor with a 48in grapple. Will I benefit from one of these too? I was considering one just for a little extra digging/cutting in with the bucket

 

[RoyKing]

Unless you have large machine buckets don't dig well, and compared to a toothbar, piranha works much better