Pimp my Tractor

   / Pimp my Tractor
  • Thread Starter
#11  
And spinners on the wheels....
 
   / Pimp my Tractor #12  
tractor buy net dk450001.jpg
At least flames....
 
   / Pimp my Tractor #14  
Hayden, nicely documented projects. Thanks for posting it was helpful. When adjusting the pressure relief valve on the loader were you using shims provided by Kubota or a generic source?

MarkV
 
   / Pimp my Tractor
  • Thread Starter
#15  
Savagepike said:
^^ Now that I like :) ^^

Ditto, now you're talking....
 
   / Pimp my Tractor
  • Thread Starter
#16  
MarkV said:
Hayden, nicely documented projects. Thanks for posting it was helpful. When adjusting the pressure relief valve on the loader were you using shims provided by Kubota or a generic source?

MarkV

Thanks. I used the Kubota shims, but need to get more. The first few were given to me by my dealer's shop chief since the tractor's new. I'll just pick up a few more - they can't be very expensive. I think I need one more 0.4 mm to get another 100 PSI, but I might go further to take it right up to the allowed limit of 2770 PSI.
 

Tractor & Equipment Auctions

2014 CATERPILLAR CT6605 SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
2018 International WorkStar 7400 T/A Dump Truck (A50323)
2018 International...
1996 FRUEHAUF 48X96 T/A FLATBED (A50854)
1996 FRUEHAUF...
2007 WABASH 53FT DRY VAN TRAILER (A51222)
2007 WABASH 53FT...
2013 HINO 388 (A50854)
2013 HINO 388 (A50854)
2018 Rock Solid 8x28 Cargo Trailer - Generator & A/C, Work-Ready (A51039)
2018 Rock Solid...
 
Top