Pat's Easy Change pat's easy change
- Thread starter ToJo
- Start date
- Views: 963
billbill1
Veteran Member
- Joined
- Oct 13, 2004
- Messages
- 1,207
- Location
- Lecompton, Kansas
- Tractor
- 2016 Mahindra 1533 Shuttle AgKing 2840 shuttle shift
Re: pat\'s easy change
3 or 4 inches I believe, my pto shaft was long enough that it wasn't a problem. Works good too, I like the Easy Change.
3 or 4 inches I believe, my pto shaft was long enough that it wasn't a problem. Works good too, I like the Easy Change.
greg_g
Super Member
- Joined
- Dec 18, 2003
- Messages
- 6,126
- Location
- Western Kentucky
- Tractor
- JD3720 Cab, 300X loader with 4-in-1 bucket
Re: pat\'s easy change
The answer depends a whole lot on the size you're buying, AND the amount of extension available in the PTO shaft.
Assuming your L3400 is the intended recipient, Pat's Cat 1 will extend the reach of the lower lift arms roughly three inches. If your PTO shaft was cut to the right length in the first place, a 3" differential should not be problematic. By example, my Cat 2 Pat's added four inches, and I still have plenty of reach on my rotary cutter PTO shaft.
//greg//
The answer depends a whole lot on the size you're buying, AND the amount of extension available in the PTO shaft.
Assuming your L3400 is the intended recipient, Pat's Cat 1 will extend the reach of the lower lift arms roughly three inches. If your PTO shaft was cut to the right length in the first place, a 3" differential should not be problematic. By example, my Cat 2 Pat's added four inches, and I still have plenty of reach on my rotary cutter PTO shaft.
//greg//
