Pat's Easy Change Pat's Easy Change System - Order Online!

ttkeeler · Sep 27, 2007

I have used a pair of these for two or three years now, very useful and easy to use.

Bedlam · Oct 7, 2007

Heres a link to a pic of the funky washer. pretty simple actually.

Pat's Easy Change System Product 3

dirtdiggerdug · Oct 9, 2007

Anyone out there using a drawbar with there Pat's QH? What type of drawbar lock are you using? Any ideas for fabricating your own? Thanks

N1ST · Oct 20, 2007

I've put one of these on a MF GC2310 and it fits and works real nice. Allows me to connect to TSC Kinc Kutter 48" Tiller - wasn't able to with out it.

Now I need a simple solution to keep the arms spread aparts before hook-up. Anyone try bending both ends of a threaded rod? I wonder if the rod would snap when bending.

Mike120 · Oct 20, 2007

Does Pat's sell replacement springs????? All of mine are broke and I have to keep them locked down with baling wire.....Still love them though!!

PATG · Oct 22, 2007

Mike120,

Contact me with your information and I send you the springs and hardware to replace.

Pat of Pat's Easy Change.

PATG · Oct 22, 2007

N1ST,

You will probably be ok. Same principle as the stabilizer bar, only it is adjustable. It is $28.00 if you are interested.

Pat of Pat's Easy Change

masseyfergboy · Oct 26, 2007

Sounds great, will it work on older 3ph (MF135), and does the top link have to be longer to make up for lower arms being moved back a little?

PATG · Oct 29, 2007

Masseyferboy,

Yes, works fine on MF135. It does extend your lift arms 3-1/2" to 4" so make sure your top link has that much extra or you can always pick up a longer one at TSC.

Thank you
Pat of Pat's Easy Change

Don R. · Oct 30, 2007

I recently purchased an 07 Kubota 4740 with the telescoping 3 pt arms. Is Pat's compatible with this model?

I've found a "cheaper" model in Texas, but is a cast iron model.