3-Point Hitch Pat's Easy Change on a L5030

   / Pat's Easy Change on a L5030 #11  
ditto what TripleR said.

Pats fits on my L5030 just fine, no problems.
I use the original style which extends the 3pt arms some.
This is the style I need...I have a hay fork...the style that sticks up above the existing arm would not fit on my hay fork. Check your implements to see if you have
All my several pieces of equipment work with the original style easy change.
I have cat II purchased directly from Pat and use bushings on my Cat I implements.
Have had them for several years. Had one spring break..called Pat, he sent me replacement springs immediately. Great to deal with. Excellent attachment. Had them for maybe 4 years.
 
   / Pat's Easy Change on a L5030 #12  
I don't have these but have wanted them for years.

If John says that they are good, you can bank on it.
 
   / Pat's Easy Change on a L5030 #13  
Can you get a set that just replace the extendable links in the lift arms?
 
   / Pat's Easy Change on a L5030 #14  
slow,

From what I have read at Pat's site, yes. But then they do not telescope since they do not need to.
 
   / Pat's Easy Change on a L5030 #15  
Can you get a set that just replace the extendable links in the lift arms?

Yes, that is the kind I got, but as RFB says, they don't telescope. I haven't put mine on yet as I have my box blade on and it doesn't make much sense to go to the trouble of taking it off to put them on so it will be "easier" to swap equipment out.:laughing:
 
   / Pat's Easy Change on a L5030
  • Thread Starter
#16  
Thanks, TexasJohn. I'll just order the original style.
 

Tractor & Equipment Auctions

2014 UTILITY 53X102 DRY VAN TRAILER (A50046)
2014 UTILITY...
Toro 30495 Groundsmaster 7200 72in Zero Turn Mower (A48082)
Toro 30495...
TANNKO  130BBL VAC TRAILER (A50854)
TANNKO 130BBL VAC...
2006 INTERNATIONAL 7600 T/A DUMP TRUCK (A51406)
2006 INTERNATIONAL...
2014 PJ 24+6 T/A GOOSENECK (A50854)
2014 PJ 24+6 T/A...
7046 (A50322)
7046 (A50322)
 
Top