Part name that acts as stop?

   / Part name that acts as stop? #1  

kubota shifty

Member
Joined
Oct 17, 2017
Messages
40
Location
san francisco, ca
Tractor
kubota 43h
I need a couple of these can can't find them anywhere. It is the round/bent over part that the pin goes through to hold them on (see pic). Anyone know? Thanks.
stop.png
 
   / Part name that acts as stop? #3  
That's the correct answer for the washer, the other part is the lynch pin sold at most farm supply outlets and by the box from Harbor Freight. The washers are sold by the pair and you will need to know whether your hitch is cat 1 or cat 2 as the sizes differ.
 
   / Part name that acts as stop? #4  
They also work well for securing trailer latches since they wont freeze like a padlock. Lots of uses for these
 
   / Part name that acts as stop?
  • Thread Starter
#6  
That's the correct answer for the washer, the other part is the lynch pin sold at most farm supply outlets and by the box from Harbor Freight. The washers are sold by the pair and you will need to know whether your hitch is cat 1 or cat 2 as the sizes differ.
I ordered Cat. 1. I hope that's right. They aren't being used on a hitch (then again, not sure how "hitch" is being used).
 
   / Part name that acts as stop? #7  
Musta not looked very hard... LOL Every box store like Lowes or Home Despot will have them and the washers as well and so does Tractor Supply or Bains or Farm and Fleet...

Far as the 'bent over washer' is concerned, buy a flat washer clamp it in a vise and bend it over... You'll need a Fender Washer which is a larger diameter.
 
   / Part name that acts as stop?
  • Thread Starter
#8  
Musta not looked very hard... LOL Every box store like Lowes or Home Despot will have them and the washers as well and so does Tractor Supply or Bains or Farm and Fleet...

Far as the 'bent over washer' is concerned, buy a flat washer clamp it in a vise and bend it over... You'll need a Fender Washer which is a larger diameter.
Don't have a vise!
 
   / Part name that acts as stop? #10  
Time to buy one... Never heard of anyone not having a vise...
My BIL. keeps his 4" vise in a cardboard box in the corner. He's not much of a tool guy, or DIY guy.
It's sometimes frustrating to help him with his projects.
 

Tractor & Equipment Auctions

HANG ON 48" CATERPILLAR FORKS (A51242)
HANG ON 48"...
2007 FREIGHTLINER BUSINESS CLASS M2 DUMP TRUCK (A51406)
2007 FREIGHTLINER...
UNUSED 120 Pairs Safety Work Gloves (A50860)
UNUSED 120 Pairs...
2003 Club Car Electric Cart (A50324)
2003 Club Car...
2000 INTERNATIONAL 4300 17FT ROLLBACK TRUCK (A51222)
2000 INTERNATIONAL...
New/Unused 20ft Farm Iron Gate (A48837)
New/Unused 20ft...
 
Top