kubota shifty
Member
I need a couple of these can can't find them anywhere. It is the round/bent over part that the pin goes through to hold them on (see pic). Anyone know? Thanks.
Part name that acts as stop?
- Thread starter kubota shifty
- Start date
- Views: 1597
LittleBill21
Elite Member
Roadworthy
Elite Member
That's the correct answer for the washer, the other part is the lynch pin sold at most farm supply outlets and by the box from Harbor Freight. The washers are sold by the pair and you will need to know whether your hitch is cat 1 or cat 2 as the sizes differ.
MH8675309
Platinum Member
They also work well for securing trailer latches since they wont freeze like a padlock. Lots of uses for these
OP
kubota shifty
Member
Ordered from Pat's. Thanks!
OP
kubota shifty
Member
I ordered Cat. 1. I hope that's right. They aren't being used on a hitch (then again, not sure how "hitch" is being used).
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Musta not looked very hard... LOL Every box store like Lowes or Home Despot will have them and the washers as well and so does Tractor Supply or Bains or Farm and Fleet...
Far as the 'bent over washer' is concerned, buy a flat washer clamp it in a vise and bend it over... You'll need a Fender Washer which is a larger diameter.
Far as the 'bent over washer' is concerned, buy a flat washer clamp it in a vise and bend it over... You'll need a Fender Washer which is a larger diameter.
OP
kubota shifty
Member
Don't have a vise!
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Time to buy one... Never heard of anyone not having a vise...
bigtiller
Super Member
- Joined
- Feb 1, 2006
- Messages
- 6,499
- Location
- central Iowa
- Tractor
- John Deere 2720 John Deere 3039R John Deere Z545R
My BIL. keeps his 4" vise in a cardboard box in the corner. He's not much of a tool guy, or DIY guy.
It's sometimes frustrating to help him with his projects.