Oxy/acet tank ownership transfer

   / Oxy/acet tank ownership transfer #71  
Auto wreckers here won't let you use torches or grinders. Too much risk of fire.
It’s been awhile and one of the salvage yards I patronized turned out to be a toxic waste site… 75 years dismantling vehicles on a coupe of acres of dirt…

Antifreeze, oils and fluids overtime…

Not many battery tool options existed in the 80’s like today… a battery sawzall can do a lot…

One of my projects was taking two damaged Model A roadster bodies and making one…

Plus I cut up a few wrecks to fit in my box trailer to take to the scrap yard…

The Roadster was all with oxy-acetylene torch and my friends could not tell where I had joined the bodies…

A lot of these skill sets are fading along with the generations that used them…

Growing up in suburbia there were always dads with home shops… maybe a drill press, air compressor, router and a table saw… a few did welding which made them a great resource for broken bikes and mower repair.

I can’t think of anyone around me with anything more than maybe a cordless drill… they are more 3D printer types and gamers…

I put together a nice set for my nephew on the farm but the folks rightfully raised concern about fire danger and they live in a high fire danger area… so I still have it.
 
Last edited:
   / Oxy/acet tank ownership transfer #72  
Auto wreckers here won't let you use torches or grinders. Too much risk of fire.

Last (and only) time time i ever got away with that was the early 90's. junk yard let me pop off some u-bolts with my portable torches to get a truck axle out.

Also got the ok to go in with a 1kw portable gen and a corded sawzall once back in the 90's too, before battery tools. had a family member encounter a small moose that went up over the hood and through the windshield and almost into his lap (folded the steering wheel back) I cut out the windshield posts on both sides of the donor vehicle with the sawzall then he OA'd them back into his with a coat hanger. windshield did require a bit of goop for a perfect seal, but it all did the trick. In some ways I kinda miss the days of my youth... Do they even make metal coat hangers anymore?
 

Tractor & Equipment Auctions

Laymor SM450-ST Sweeper (A51573)
Laymor SM450-ST...
2024 JOHN DEERE 4044M LOT NUMBER 65 (A53084)
2024 JOHN DEERE...
NEW Wolverine 72'' Skid Steer Tiller (A53002)
NEW Wolverine 72''...
2015 HINO XJC740 BOX TRUCK (A52576)
2015 HINO XJC740...
2006 INTERNATIONAL 7600 T/A DUMP TRUCK (A51406)
2006 INTERNATIONAL...
GODWIN CD150M DRI PRIME PORTABLE PUMP (A51406)
GODWIN CD150M DRI...
 
Top