old craftsman saw

[zombie]

So I wasn't sure where to post this at, but here goes. I have an old craftsman "electric hand saw" (6.5" circular saw) that I need a trigger switch for. I have already pulled apart the old one and tried to repair it. It worked for a couple used and then quit on me again. I'm having trouble locating a switch though. I contacted sears and they were all set to sell me a switch, but it was for a stationary piece of equipment and is on or off, not momentary. Wondering if anyone has any resources for such a thing? The model is 336.27963 As far as I can tell it was made by electrolux, but can't find anything from them about it.

 

[dragoneggs]

Not sure if you looking to restore a collectible or just want to get your old clunker to work. I see these p/n saws on eBay for $20 to $40. You might find somebody just selling a junker for parts. At Homedepot.com you can get a new Ryobi or Skil for under $40 and a reconditioned one for under $30. Otherwise I think you are into a serious hunt for a switch only. Good luck.

 

[zombie]

It was my grandfather's saw and I enjoy using it. At least when I can get it to work. I haven't given into getting a new one yet. It's the only one I have right now. I know in the world today it's silly to use, but it's sentimental to me. I still use the all metal jigsaw too. Luckily it's trigger works fine. I still run his old stihl 045, still use his tools both at home and at work. Even if I can't find a switch, I wouldn't be able to let go of it.

 

[Coyote machine]

You don't have to let go of it. Maybe put it up on a shelf where you can look at it from time to time.
As stated, you can get a newer saw, brand new or used, from various sources, including some very nice refurbished saws/tools, either online or in a store. I have a bunch of I don't want to throw away old tools too, I know the feeling.
How much for the 045?

 

[zombie]

Yep. Just a last attempt at finding a repair part before I get a replacement saw. Had to put it out there ya know. Laying around with a sprained ankle gives me time to think about projects. And check the board every half hour. Haha.
That 045 is good running saw. Found a fuel tank for it, pop had dropped it and put a hole in it. Sat for years before I got it. I don't have to run it too often, has a 28" bar on it. But it's a workhorse. Needless to kindly say not for sale.

 

[Coyote machine]

Well, no harm in asking- thought I might be able to add it to my collection of Stihls, see my signature.
If you change your mind let me know. Good luck with the ankle, been there.....

 

[zombie]

I'll have to get on the computer and see. My phone won't show your signature.
Thanks, ankle is doing decent. Hard to stay off of it. I'm used to always working. Sprained the left one last year but it was much worse than it is this time

 

[Coyote machine]

Here's a hint: I currently have 7 Stihls. I'm a retired pro tree surgeon/climber from way back, when all the Stihls were made in Germany.:thumbsup:

 

[dragoneggs]

Yep. Just a last attempt at finding a repair part before I get a replacement saw. Had to put it out there ya know. Laying around with a sprained ankle gives me time to think about projects. And check the board every half hour. Haha.
That 045 is good running saw. Found a fuel tank for it, pop had dropped it and put a hole in it. Sat for years before I got it. I don't have to run it too often, has a 28" bar on it. But it's a workhorse. Needless to kindly say not for sale.

I understand... I am wrestling with my dad's 10in radial arm saw, circa 1963. I haven't used it in at least 10years but I can't part with it. The sad thing is I don't have the space for it but somehow it survives!

 

[zombie]

That's a nice collection of saws coyote. One or two for every size lol. I just picked up a midsize mcculloch but can't remember what size it is. I think it has a 16" bar on it. I need to put a carb kit in it. I already had a small poulan 2000 with a 10" for limbing. I also have an old homelite xl that I need to put a carb kit in. I have the kit, just haven't found the time. It's got about the same size bar as the 045. And as sad as it is to admit, there's an electric mcculloch. Sure is easy to start though!!

Dragon: seems like I just came across an article about using those radial arm saws, something about different attachments and some guys can't live without them. I can't remember where I saw it though. I'm not good at woodwork and I fully admit it. I can cut a straighter line with a chainsaw than a circular saw.

 

[dragoneggs]

Dragon: seems like I just came across an article about using those radial arm saws, something about different attachments and some guys can't live without them. I can't remember where I saw it though. I'm not good at woodwork and I fully admit it. I can cut a straighter line with a chainsaw than a circular saw.

My dad built a cabin in the late 60s with one of these. You can rip as well as crosscut by turning the head. Then you can add dado blades, molding cutters and do all kinds of trim work. A bit dangerous ripping vs. a table saw but versatile. Newer compound mitre saws especially the sliding ones have obsoleted radial arm saws I think... this one isn't mine but very close. I know I'm taking your thread off topic but it does still fit the title

 

[zombie]

That's pretty awesome, I can't blame you for keeping it! I've been tempted to buy one with how cheap they go for around here, but space is a concern. I don't do anything fancy anyway. I did find that article though. Are Radial Arm Saws a Thing of the Past? / Rockler How-to

No worries about topic. I like hearing stories like this. I like using old school tools for most of what I do. Especially at home. Guys at work laugh when I pull out a file, meanwhile, they're digging through their toolbox trying to find the right attachment to do the same thing and I'm done before they find it. Yeah, I have that stuff too, but sometimes old school is actually faster.

 

[Rustyferrious]

Zombie, My business is finding and selling parts for vintage machinery/tools. I don't have one of those in stock currently, but there is one on ebay for $33 or "Best Offer". I would bet that you could get it for $20, plus shipping, which is probably close to what sears was going to charge you for the other switch. Worth a shot for Grandpa's saw!

 

[dragoneggs]

That's pretty awesome, I can't blame you for keeping it! I've been tempted to buy one with how cheap they go for around here, but space is a concern. I don't do anything fancy anyway. I did find that article though. Are Radial Arm Saws a Thing of the Past? / Rockler How-to No worries about topic. I like hearing stories like this. I like using old school tools for most of what I do. Especially at home. Guys at work laugh when I pull out a file, meanwhile, they're digging through their toolbox trying to find the right attachment to do the same thing and I'm done before they find it. Yeah, I have that stuff too, but sometimes old school is actually faster.

Thanks for sharing the article. The material quality and weight of the saw is from a bygone era making it hard to part with. Especially the memories of my dad. He started teaching me how to use tools when I was about 7 years old.