oil pressure light

[blizzard2565]

Hi all, after using my tractor for a couple hours yesterday, i shut it off for the night and it beeped about 6 or 8 times. This morning I went to start it and waiting for the glow plug to go out I noticed the oil pressure light on and the tractor won't turn over. If i disconnect the wire from the sending unit, the light goes out but still doesn't start. Any help would be wonderful. I have 76 hours on my xr3135h and it's ran flawless, also did the 50 hour service. Thanks for any help;

 

[Rc4510]

Hi all, after using my tractor for a couple hours yesterday, i shut it off for the night and it beeped about 6 or 8 times. This morning I went to start it and waiting for the glow plug to go out I noticed the oil pressure light on and the tractor won't turn over. If i disconnect the wire from the sending unit, the light goes out but still doesn't start. Any help would be wonderful. I have 76 hours on my xr3135h and it's ran flawless, also did the 50 hour service. Thanks for any help;

The oil pressure light should be on if engine is not running,if engine is not turning over make sure it's in neutral,or the hst pedal switch isn't giving you problems.

 

[blizzard2565]

Thanks, I will check the hst switch.

 

[blizzard2565]

Rc4510, thanks so much for the info, you were spot on...