Noisy front end

/ Noisy front end #1  

Massey1010

Member
Joined
May 9, 2007
Messages
36
Location
Willamette Valley
I brought my CK20 HST in to do maintenance and jacked the front end up. I spun the tires by hand and the gears sound really loud. Is this normal?
 
/ Noisy front end #2  
Does spinning the tires on both sides sound the same? Are you in 4WD?
 
/ Noisy front end #3  
If it is just gear noise and not grinding, it is normal.
 
/ Noisy front end
  • Thread Starter
#4  
Spinning the tires on both sides sounds the same either direction. I just wasn't expecting it to be as loud as it was. Apparently that is normal.
 
/ Noisy front end #5  
You are probably hearing the front differential (if the other front wheel turns in opposite direction). The spider gears can be noisy (especially if straight cut gears). Normally, engine noise hides gear noises.
 
/ Noisy front end #6  
What is the fluid level. There should be a site glass on the axle tube. When I changed mine, spinning the axles produces some noise, but I would not call it loud. Just a clicking sound.
Hope this helps.
 
/ Noisy front end #7  
Kioti uses the hydro fluid for the front axle lube. This thinner oil might make the gears sound noisey compared to regular 80-90 gear oil.
 
/ Noisy front end
  • Thread Starter
#8  
The fluid level was showing normal in the site glass. When I've changed the fluid in the axle I've used hydro fluid since that was what was in there originally. Gear oil would probably make the gears sound quieter.

Thanks
 

Marketplace Items

Tafe 45DI (A60462)
Tafe 45DI (A60462)
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
2018 22ft. Tycorp Vector Belt VB-16H (A60352)
2018 22ft. Tycorp...
BUYERS PREMIUM & PAYMENT TERMS (A59908)
BUYERS PREMIUM &...
1999 Sterling L9513 Tri-Axle Roll Off Truck (A59230)
1999 Sterling...
Cushman Electric Cart (A55851)
Cushman Electric...
 
Top