Massey1010
Member
I brought my CK20 HST in to do maintenance and jacked the front end up. I spun the tires by hand and the gears sound really loud. Is this normal?
Noisy front end
- Thread starter Massey1010
- Start date
- Views: 3523
RNeumann
Elite Member
Does spinning the tires on both sides sound the same? Are you in 4WD?
BTI
Platinum Member
If it is just gear noise and not grinding, it is normal.
OP
Massey1010
Member
Spinning the tires on both sides sounds the same either direction. I just wasn't expecting it to be as loud as it was. Apparently that is normal.
ritcheyvs
Veteran Member
You are probably hearing the front differential (if the other front wheel turns in opposite direction). The spider gears can be noisy (especially if straight cut gears). Normally, engine noise hides gear noises.
powerscol
Veteran Member
What is the fluid level. There should be a site glass on the axle tube. When I changed mine, spinning the axles produces some noise, but I would not call it loud. Just a clicking sound.
Hope this helps.
Hope this helps.
VictorW
Veteran Member
Kioti uses the hydro fluid for the front axle lube. This thinner oil might make the gears sound noisey compared to regular 80-90 gear oil.
OP
Massey1010
Member
The fluid level was showing normal in the site glass. When I've changed the fluid in the axle I've used hydro fluid since that was what was in there originally. Gear oil would probably make the gears sound quieter.
Thanks
Thanks