NH TC30 Hydraulic Remotes

   / NH TC30 Hydraulic Remotes
  • Thread Starter
#11  
Hey guys!

Been trying to get some info from my dealer as well as some others. They're still checking on adding power-beyond. I'm limited to 1 rear remote. They also think I might be limited by pump output on the ability to running additional cylinders. Maybe I'll hear something more definate this week. If I can only run 1 rear remote without a power-beyond from that maybe I would be best to use the FEL power-beyond for the joystick valve for the T-N-T. Then I wonder if it's even worth adding the rear remote for the woodsplitter etc.
 
   / NH TC30 Hydraulic Remotes #12  
They also think I might be limited by pump output on the ability to running additional cylinders.
That's a load of BS...you can add 100 cylinders to your machine-you can't use them all at once but you can still add them.

They're still checking on adding power-beyond.
You already have that-that what you hook your splitter to.
 
   / NH TC30 Hydraulic Remotes
  • Thread Starter
#13  
Yeah that's what I thought Kenny. I'll wait awhile to see if I get any other input. You think it's worth adding the single rear remote if that's all that's available or just using the FEL power-beyond for the T-N-T/woodsplitter? Maybe I could use the rear remote for Top and run a dual purpose valve off the FEL for TILT and to use with the woodsplitter? Still like the joystick idea better.
 
   / NH TC30 Hydraulic Remotes #14  
Forget the dealer and the single remote. You should add a new joystick valve ($200) to your existing PB loop (probably $200-$300 in hoses, fittings and QD's) for your TnT setup. You will get exactly what you want and not have to settle for less.
 
   / NH TC30 Hydraulic Remotes
  • Thread Starter
#15  
Kenny
I spoke with another dealer. He said it's possible to stack the remote blocks together to get two remotes. The issue would be fender clearance. He said they're about 8" stacked. I have just enough room, then I would need to deal with lever placement and remote outlet routing since they come with the same piping. Do you think that's worth pursuing at $450/remote or not?
thanks again Matt
 

Tractor & Equipment Auctions

2011 International WorkStar 7400 Chassis Truck, VIN # 1HTWGAAR1BJ325796 (A51572)
2011 International...
KONE CRANES SMV-25-1200 HEAVY LIFT FORKLIFT (A50854)
KONE CRANES...
E-Z Trail 672 Head Cart (A50514)
E-Z Trail 672 Head...
2014 Doosan DA30 (A51039)
2014 Doosan DA30...
Toro Z Master Mower (A50324)
Toro Z Master...
2017 Kawasaki Mule 4010 4x4 Rescue Utility Cart (A50322)
2017 Kawasaki Mule...
 
Top