NH 1925 hst what is the clutch pedal for ?

   / NH 1925 hst what is the clutch pedal for ? #1  

Sprinklerman

Platinum Member
Joined
Dec 7, 2014
Messages
914
Location
severna park
Tractor
New Holland 1925 Kubota bx 24
I have been playing with my new toy , but for the life of me I have no clue what the pedal on the left is for . I am guessing it is the clutch . But its a hydrostatic machine . Maybe for the 3 point ? I am also curious if the hydrostat is seperate from the hydraulic oil?
 
   / NH 1925 hst what is the clutch pedal for ? #2  
Do you have a low, medium, and high range hst? Clutch would be for disconnecting the engine so you can shift.
Manual should tell you about the hydro/hydraulic oil. Most hydrostatic units I have seen are combined.
 
   / NH 1925 hst what is the clutch pedal for ?
  • Thread Starter
#3  
It does have 3 ranges , The guy I bought it from is looking for the manual , I thought it was strange that there was a filter for the hydraulics , and another for the HST .
 
   / NH 1925 hst what is the clutch pedal for ? #4  
It does have 3 ranges , The guy I bought it from is looking for the manual , I thought it was strange that there was a filter for the hydraulics , and another for the HST .

Most Kubotas have two filters as well. One is a hydraulic suction filter, the other is for fluid the HST. Someone may have schematics that give more detail. Same fluid in a single reservoir for both hydraulics and HST.
 
   / NH 1925 hst what is the clutch pedal for ? #5  
I had a Mahindra 2615 HST. It also had a clutch pedal. My main clutch use was for engaging the PTO slowly.
 
   / NH 1925 hst what is the clutch pedal for ? #6  
I have been playing with my new toy , but for the life of me I have no clue what the pedal on the left is for . I am guessing it is the clutch . But its a hydrostatic machine . Maybe for the 3 point ? I am also curious if the hydrostat is seperate from the hydraulic oil?

It is the clutch for shifting ranges and engaging ptos. Probably a common sump for hydraulic oil with two filters, at least that's what mine has.
 
   / NH 1925 hst what is the clutch pedal for ? #7  
PTO and range gears would grind pretty bad even at idle without a clutch.
 
   / NH 1925 hst what is the clutch pedal for ? #8  
On my TC 29d the PTO's need the clutch. However I have found that changing ranges sometimes feathering the clutch allows it to change easier and faster.
 
   / NH 1925 hst what is the clutch pedal for ? #9  
Shifting, PTO engagement, and starting interlock on some tractors, just like a stick shift car.
 
   / NH 1925 hst what is the clutch pedal for ?
  • Thread Starter
#10  
thanks
 

Tractor & Equipment Auctions

2014 PJ TRAILER 40' TANDEM AXLE GOOSENECK (A52472)
2014 PJ TRAILER...
Informational Lot - Shipping (A53473)
Informational Lot...
2017 John Deere TX Gator Utility Cart (A51691)
2017 John Deere TX...
2005 FORD F-650 (A52472)
2005 FORD F-650...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Payment Terms (MUST READ) (A50775)
Payment Terms...
 
Top