NH 1925 hst what is the clutch pedal for ?

   / NH 1925 hst what is the clutch pedal for ? #1  

Sprinklerman

Platinum Member
Joined
Dec 7, 2014
Messages
914
Location
severna park
Tractor
New Holland 1925 Kubota bx 24
I have been playing with my new toy , but for the life of me I have no clue what the pedal on the left is for . I am guessing it is the clutch . But its a hydrostatic machine . Maybe for the 3 point ? I am also curious if the hydrostat is seperate from the hydraulic oil?
 
   / NH 1925 hst what is the clutch pedal for ? #2  
Do you have a low, medium, and high range hst? Clutch would be for disconnecting the engine so you can shift.
Manual should tell you about the hydro/hydraulic oil. Most hydrostatic units I have seen are combined.
 
   / NH 1925 hst what is the clutch pedal for ?
  • Thread Starter
#3  
It does have 3 ranges , The guy I bought it from is looking for the manual , I thought it was strange that there was a filter for the hydraulics , and another for the HST .
 
   / NH 1925 hst what is the clutch pedal for ? #4  
It does have 3 ranges , The guy I bought it from is looking for the manual , I thought it was strange that there was a filter for the hydraulics , and another for the HST .

Most Kubotas have two filters as well. One is a hydraulic suction filter, the other is for fluid the HST. Someone may have schematics that give more detail. Same fluid in a single reservoir for both hydraulics and HST.
 
   / NH 1925 hst what is the clutch pedal for ? #5  
I had a Mahindra 2615 HST. It also had a clutch pedal. My main clutch use was for engaging the PTO slowly.
 
   / NH 1925 hst what is the clutch pedal for ? #6  
I have been playing with my new toy , but for the life of me I have no clue what the pedal on the left is for . I am guessing it is the clutch . But its a hydrostatic machine . Maybe for the 3 point ? I am also curious if the hydrostat is seperate from the hydraulic oil?

It is the clutch for shifting ranges and engaging ptos. Probably a common sump for hydraulic oil with two filters, at least that's what mine has.
 
   / NH 1925 hst what is the clutch pedal for ? #7  
PTO and range gears would grind pretty bad even at idle without a clutch.
 
   / NH 1925 hst what is the clutch pedal for ? #8  
On my TC 29d the PTO's need the clutch. However I have found that changing ranges sometimes feathering the clutch allows it to change easier and faster.
 
   / NH 1925 hst what is the clutch pedal for ? #9  
Shifting, PTO engagement, and starting interlock on some tractors, just like a stick shift car.
 
   / NH 1925 hst what is the clutch pedal for ?
  • Thread Starter
#10  
thanks
 

Tractor & Equipment Auctions

2006 KENWORTH T800 TANDEM SLEEPER TRUCK (A52141)
2006 KENWORTH T800...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2017 HINO BOX TRUCK (A52576)
2017 HINO BOX...
2012 Altec WC126A Chipper S/A Trailer (A51691)
2012 Altec WC126A...
1998 FORD CRANE (A52472)
1998 FORD CRANE...
NEW Wolverine Skid Steer Pallet Forks Hydro Adjustable (A53002)
NEW Wolverine Skid...
 
Top