New Truck

/ New Truck #1  

Iowachild

Veteran Member
Joined
Feb 16, 2006
Messages
1,025
Location
NW PA
Tractor
Kubota B2320HST
Replaced my 2003 F-150, the frame was rusting away fast, with a new 2012 Toyota Tundra. It's a 5.7 liter with tow package and a few other additions. Fast approaching my first 1000 miles and I love it.:thumbsup: Granted I am only towing a trailer with a B2320/loader and a box blade or my BX42 chipper, but it tows like a dream.:cloud9:
I still have to replace the girlie man tires with some LT rated units!:muttering::muttering:
 

Attachments

  • DSCN3803.jpg
    DSCN3803.jpg
    965.3 KB · Views: 221
  • DSCN3804.jpg
    DSCN3804.jpg
    995.9 KB · Views: 195
  • DSCN3807.jpg
    DSCN3807.jpg
    932.3 KB · Views: 174
/ New Truck #2  
I have an 07 with 29k. Its been a good truck so far. Oil changes are a pain in the $%#.The factory uses a plastic oil filter housing that isn't easy to remove.also, having to remove the guard to assess the oil filter makes oil changes a real pain. I'm in the process of replacing the plastic housing with 1 made from alumnium.
 
/ New Truck #3  
Iowachild said:
Replaced my 2003 F-150, the frame was rusting away fast, with a new 2012 Toyota Tundra. It's a 5.7 liter with tow package and a few other additions. Fast approaching my first 1000 miles and I love it.:thumbsup: Granted I am only towing a trailer with a B2320/loader and a box blade or my BX42 chipper, but it tows like a dream.:cloud9:
I still have to replace the girlie man tires with some LT rated units!:muttering::muttering:

Iowachild;

Nice ride! You couldn't have worked the LT tires in the deal?
 
/ New Truck #4  
Very nice truck, if I ever wear my 06 Tundra out, I'll get one just like that.:thumbsup:
 
/ New Truck #5  
Nice truck, congratulations! I recently left the GM team and went back to Toyota, except I bought a 2012 Tacoma double cab 4x4 v6. Love it! Don't miss owning a full size truck like I thought I was going to, especially everytime I fill up and calculate my mileage ;)
 
/ New Truck #6  
Nice. My next truck will be a Tundra or F-150 Eco unless Nissan does something major. I owned a Tacoma and at 170,000 miles the only thing but fluids, brakes, tires, belts, and hosed I had to replace was the Slave Cylinder. Rust got the best of that truck.

Chris
 
/ New Truck
  • Thread Starter
#7  
I have an 07 with 29k. Its been a good truck so far. Oil changes are a pain in the $%#.The factory uses a plastic oil filter housing that isn't easy to remove.also, having to remove the guard to assess the oil filter makes oil changes a real pain. I'm in the process of replacing the plastic housing with 1 made from alumnium.

I have free oil changes for two years, so I won't have the "fun" for a while.
 
/ New Truck
  • Thread Starter
#8  
Iowachild;

Nice ride! You couldn't have worked the LT tires in the deal?

NO! the truck I started dealing on had the same tires with painted steel wheels. I asked what we could do about changing wheels and tires and they told me they were not allowed to change the way it came from the factory. I had a great salesman that found this unit with the chrome wheels and some other additions and actually got a better deal on this truck.
 
/ New Truck
  • Thread Starter
#9  
Nice truck, congratulations! I recently left the GM team and went back to Toyota, except I bought a 2012 Tacoma double cab 4x4 v6. Love it! Don't miss owning a full size truck like I thought I was going to, especially everytime I fill up and calculate my mileage ;)

So far I am getting ~16.5 mpg on mixed driving. Better than I was doing with the 5.4 Ford. I don't drive to work, so MPG is not a real issue with me. BTW the 2003 Ford with rusting frame I traded had 49,500 miles when I trade it. I had to replace rusted out exhaust manifolds at 45K!
 
Last edited:
/ New Truck #10  
So far I am getting ~16.5 mpg on mixed driving. Better than I was doing with the 4.5 Ford. I don't drive to work, so MPG is not a real issue with me. BTW the 2003 Ford with rusting frame I traded had 49,500 miles when I trade it. I had to replace rusted out exhaust manifolds at 45K!

I have one Ford, sadly. Manifold bolts are rotted off..Have a start problem that a new ignition switch and starter won't cure...Never again, I've had GM's for 25 years and never had issues like this. There are a few on this board yacking about the superiority of Ford over GM...Not.

Next motorhome will be a GM chassis to be certain....You should see the failure notice warning on the new starter...Sad.
 
/ New Truck #11  
Replaced my 2003 F-150, the frame was rusting away fast, with a new 2012 Toyota Tundra. It's a 5.7 liter with tow package and a few other additions. Fast approaching my first 1000 miles and I love it.:thumbsup: Granted I am only towing a trailer with a B2320/loader and a box blade or my BX42 chipper, but it tows like a dream.:cloud9:
I still have to replace the girlie man tires with some LT rated units!:muttering::muttering:


Congrats on the new truck, I have a 2007 5.7 4x4 tow package and the TRD package. My truck has 112,500 miles, the only repair I have had to do was replace the water pump at 86,000 miles.
 

Attachments

  • 100_0110.jpg
    100_0110.jpg
    1.1 MB · Views: 115
/ New Truck #12  
Tundra was a close second when I purchased a new truck last year. Nice trucks!

The only frame rust issues I have ever heard of are in the Tacoma . My dad had a frame break on a Tacoma while driving. The cab and bed came together but he was able to limp home.
 
/ New Truck #13  
Nice truck...
A buddy of mine bought one just like it...
I think that it is either an 09 or 10...
He really likes it...
I have an F350 4x4 dually and my next truck will either be a Tundra or F150 or F250...
Toyota has done a really nice job with that vehicle...
 

Marketplace Items

2015 International WorkStar 7500 T/A Dump Truck (A61568)
2015 International...
2022 Mac Trailers 48ft. T/A Walking Floor Trailer (A61568)
2022 Mac Trailers...
500BBL WHEELED FRAC TANK (A58214)
500BBL WHEELED...
2025 Pabreak Hydraulic Brush Cutter Skid Steer Attachment (A61567)
2025 Pabreak...
Rotary SPOA9-200 Automotive Lift (A56857)
Rotary SPOA9-200...
429938 (A61165)
429938 (A61165)
 
Top