New Trailer Pics

[Xfaxman]

I recommend the ratchet binders with the folding handle.

Got them at a store in Oklahoma City

 

[GreatWhitehunter]

Xfax, those are the exact ones I was referring to. Care to review them for us?

Matt

 

[Xfaxman]

Review of QuickBinder ratchet binders with the folding handle.

Xfax, those are the exact ones I was referring to. Care to review them for us?

Matt

They work good like folding handle ratchet binders should.

I like the free spin setting in the center, for quick adjusting in either direction. I bought them at Edwards Wire Rope many years ago.

They hold the V417 to the Delta. :thumbsup:

They can also be padlocked:

 

[aarolar]

More pics - just figured out rigging and loaded up for the first-tow in the morning. Recreational tractor fun this weekend. Nothing is fully tightened...

View attachment 495698

View attachment 495699

View attachment 495700

View attachment 495701

How do you have your pallet forks attached to the side of the trailer?

 

[check]

They work good like folding handle ratchet binders should. I like the free spin setting in the center, for quick adjusting in either direction. I bought them at Edwards Wire Rope many years ago. They hold the V417 to the Delta. :thumbsup: <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=496237"/> <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=496238"/> <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=496239"/> They can also be padlocked: <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=496240"/>

Cool!

 

[762MM]

My binders are exactly the same as the ones pictured and described by Xfaxman. My experience is limited - only about 350 miles of use. I purchased them recently and they came out to a few pennies less than $50 each - shipped. They are made in China, but seem to be well constructed.

Peerless QuikBinder Plus Ratcheting Loadbinder: Peerless QuikBinder Plus™ Ratcheting Loadbinder


4 of them with 5/16 G70 chain held my approx 6000lb load like it wasn't even there. No adjustments were needed for my initial round trip.

aarolar: [How do you have your pallet forks attached to the side of the trailer?] - When I had the trailer built I opted for the Pallet Fork Holder. Certainly saves space if hauling multiple implements. Here is a side pic showing the fork 'receptacles'.