Need new Joystick

[Taktiks]

I saw a combined unit at Vevor. Is it worth a shot? But on my second 2400H its valve has the capabilities on the decal. Would Vevor’s do this?

 

[TractorTech]

The Vevor valve should do everything your current valve does. Check the specs for "Float", but if it is for a loader situation, then it does. Vevor products are very inexpensive Chinese products. From what I have experienced, they perform as expected, but don't expect to get parts is needed.
Also, you probably have to change your plumbing to accommodate the Vevor valve.

 

[Taktiks]

If you had to replace your loader valve do you have a preference?

 

[ptsg]

If you end up going with a new valve, make sure you get the correct power beyond sleeve for that valve you get.

 

[Taktiks]

I don't have a Branson, but have you looked at Surplus Center?

2 Spool Compact 10 GPM Joystick Control Valve Brand Hydraulics LV22TSTKA2B | Directional Control Valves | Hydraulic Valves | Hydraulics | www.surpluscenter.com

2 Spool Compact 10 GPM Joystick Control Valve Brand Hydraulics LV22TSTKA2B, Directional Control Valves, 2 SPOOL JOYSTICK LOADER CONTROL VALVEBrand Hydraulics,LV22TSTKA2B,

www.surpluscenter.com

I believe this is what I need. I wonder if it is vastly better than a cheapie from Vevor?

 

[TractorTech]

I believe this is what I need. I wonder if it is vastly better than a cheapie from Vevor?

May be the same valve, but that will work.

 

[Taktiks]

Sorry for the delay. I did purchase a rocker plate and am thinking of buying cables too, before I go the whole joystick route. I am not at the tractor's location, but are there "stand-sized" cables as I cann ot find specs on the length of the ones I have.
If all that fails, I would go the combined JS/valve and deal with new hoses as they are weathered. The Surplus unit looks good. No idea about thread compatibility. Any other suggestions? I will call Scott, the Service Director in Rome, Atlanta, but he can be hard to get a hold of.
By the way, does anyone know if a Peruzzo Flail mower will fit a Harbor Freight quick attach?
Thank you