Need help identifying Rexroth Motor

[TomOnTractorByNet]

The motor(s) on my Powerfab skid steer micro-excavator are leaking and need repair/renewal of seals etc.

In order to get them looked at by a repair shop, I need their model ID. They are Rexroth, from the mid- 1980s. Has anyone on here ever seen motors like these and/or can identify them?

I would be grateful for any help anyone can give me on this.

Thanks

Tom

 

[oldnslo]

The motor(s) on my Powerfab skid steer micro-excavator are leaking and need repair/renewal of seals etc.

In order to get them looked at by a repair shop, I need their model ID. They are Rexroth, from the mid- 1980s. Has anyone on here ever seen motors like these and/or can identify them?

I would be grateful for any help anyone can give me on this.

Thanks

Tom

try contacting ETS Hydro at 901 369-5404. They specialize in repairing Rexroth equipment.

This may be some of the Racine hydraulics that was purchased by Bosch and then Bosch purchased Rexroth.

good luck

Roy

 

[TomOnTractorByNet]

try contacting ETS Hydro at 901 369-5404. They specialize in repairing Rexroth equipment.

This may be some of the Racine hydraulics that was purchased by Bosch and then Bosch purchased Rexroth.

good luck

Roy

Thanks Roy

I'm pretty sure its a Rexroth from mid 1980s. Really need the model number/details though.

Tom

 

[TomOnTractorByNet]

Just back from my local Hydraulic shop. Unit dismantled and deemed to be Rexroth from when they were working with a Scottish company called Carron in Kirkaldy. Still no details on the actual model though.

 

[MHarryE]

You can try calling Rexroth service at their Fountain Inn location, 864-962-6025 and see if they can tell you anything about it. You can also call their Scottish facility where they make their current radial piston motors 011 44 (0) 1592 631 777. I can't remember if you have to use that zero in parenthesis or not if calling from out of country so I would try Fountain Inn first but don't count on much help on these older models.

 

[CJONE]

Without having the units here IDing them will be tough. If nobody can help you and you would be willing to send them to michigan MAYBE we can do something on them but they are older and Rexroth has not been real consistant with who they source stuff from, and for parts. We have to make alot of stuff in house. CJ