Need Extension

   / Need Extension #1  

Bob_Bainbridge

Platinum Member
Joined
Jun 22, 2004
Messages
768
Location
NE Ohio
I have a new 2015 Enduro XT3 GSX and just did my annual lube & maintenance to start the mowing season. The GSX has 2 zerk fittings on the steering gear. One is angled and the other is horizontal. The fittings are located beneath the battery just above the deck. I have a lever operated grease gun with a 12 inch hose. I cannot reach the fittings with the gun because there isn't room in the opening for the gun and my arm. Perhaps if I went on a diet. I took the easier way out and went to Tractor Supply today and bought a 36 inch rubber grease hose extension. I haven't tried it yet but thinkiy will work with no problem.

Bob B.
 
   / Need Extension #2  
Don't you just love the way some things are engineered/designed. Its more than obvious that the designers never have to get to some of these locations. I've always wondered if they sit in their little cubicles and laugh about this.......
 

Tractor & Equipment Auctions

20 ft. Shipping Container (A53117)
20 ft. Shipping...
2018 JCB 3TS-8T Skidloader (RIDE AND DRIVE) (LIKE NEW) (A50775)
2018 JCB 3TS-8T...
2012 JOHN DEERE 10-INCH REAR WHEEL SPACER FOR 10 BOLT HUB (A55301)
2012 JOHN DEERE...
1987 International S1900 Flat Bed Truck (RUNS)(TITLE) (A50775)
1987 International...
BrushFox HD-78STD 78in Rotary Brush Cutter Skid Steer Attachment (A55787)
BrushFox HD-78STD...
Mini Plate (A53316)
Mini Plate (A53316)
 
Top