my project

   / my project #1  

massey240

Member
Joined
Feb 6, 2014
Messages
48
Location
Greenville, sc
Tractor
Massey 240
Getting my big boy fixed up just pulled the engine for a rebuild the old Perkins had injection pump failure and over revved killing a couple piston rings. With 12,000+ hours on the clock gauge quite years ago at 12,000 it was bound to happed. Tractor is a Massey 40B backhoe loader.

ForumRunner_20140911_041628.png



ForumRunner_20140911_041648.png



ForumRunner_20140911_041708.png
 
   / my project #2  
Now that's a serious rebuild!!!!! Are you just doing the engine, or will you be going through everything? Are parts easy to find?

Eddie
 
   / my project
  • Thread Starter
#3  
Eddie I am doing complete engine rebuild. I figured I will put new seals on input shaft on transmission and new throwout bearing. Its an old farm backhoe that sees light use. It only took me and dad four hours to get it broke down to this point. Parts have been available from a local tractor shop with everything I have needed so far being in stock. Its a Perkins 4.203 engine so all the rebuild stuff was a click away from eBay.
 
   / my project
  • Thread Starter
#4  
I am always working on one of my farm tractors for one reason or another. I buy and fix up older ones for use around my farm so I can save cash. Just a few things from this month. My F250 is the biggest workhorse and reliable. The backhoe had to be moved over to one of my dads shops that has a 12 foot tall door so we could work inside I normally don't haul it with that setup.

cl-1367640254.jpg



ForumRunner_20140911_164435.png



ForumRunner_20140911_164449.png



ForumRunner_20140911_164541.png
 
   / my project
  • Thread Starter
#5  
Finished the rebuild a good while back so here is a picture all back together. Put a couple hundred hours digging stumps since it was finished. I also rebuilt the front bucket where it was bent on top it was cut out and square tube added

ForumRunner_20150312_211142.png
 
   / my project #7  
Here is another tractor I rebuilt and painted. /QUOTE]

Very nice work! Can I ask what type/brand of paint you used on the Massey?
 
   / my project
  • Thread Starter
#9  
Yes HCJ that was me. I used Magic paint sold at tractor supply on the Massey. I never used valspar tractor paint but hear its a better paint and I know they make paints for John Deere
 
   / my project #10  
Most impressive. Nice to see the before and after pics!!!!

Eddie
 

Tractor & Equipment Auctions

2016 CATERPILLAR 325FL EXCAVATOR (A52705)
2016 CATERPILLAR...
2017 Makita HM1307CB 35lb Demolition Hammer (A52377)
2017 Makita...
UNUSED LANDHONOR UNIVERSAL ADAPTER PLATES (A54757)
UNUSED LANDHONOR...
2013 KENWORTH T680 TRI AXLE SLEEPER TRUCK (A54607)
2013 KENWORTH T680...
TORO MBTX 2500 STAND-ON CONCRETE BUGGY (A51406)
TORO MBTX 2500...
2008 Ford F-450 14FT Flatbed Truck (A51692)
2008 Ford F-450...
 
Top