My Branson won\'t start!!!!
I have a 2000 Branson F4350 (similar to the 20 series with a different motor). Used it two days ago, parked it. Got on yesterday and it wouldn’t turn over. After the glow plug solenoid sound, there is no noise at all when I try to start it. Shuttle shift in neutral, gear shift in neutral, PTO selector in the center of the two speeds, battery reading 12 volts, glow plug cycles (I can hear the solenoid), clutch depressed all the way down and I cleaned the battery terminals and cable ends. I even tried jumping it with my F250.
I bought this unit a couple of months ago, put 15 hours on it with no problems till now. While I had the key in the start position, I cycled the shuttle shift lever, the gear shift lever and the PTO lever just to see if I had a safety switch not disengaging.
HELP, I don’t know what to try first, second, etc.
Thanks for the help
I have a 2000 Branson F4350 (similar to the 20 series with a different motor). Used it two days ago, parked it. Got on yesterday and it wouldn’t turn over. After the glow plug solenoid sound, there is no noise at all when I try to start it. Shuttle shift in neutral, gear shift in neutral, PTO selector in the center of the two speeds, battery reading 12 volts, glow plug cycles (I can hear the solenoid), clutch depressed all the way down and I cleaned the battery terminals and cable ends. I even tried jumping it with my F250.
I bought this unit a couple of months ago, put 15 hours on it with no problems till now. While I had the key in the start position, I cycled the shuttle shift lever, the gear shift lever and the PTO lever just to see if I had a safety switch not disengaging.
HELP, I don’t know what to try first, second, etc.
Thanks for the help