Mounting YM 3000 Hyd remotes

[chriswheeler]

Would like to mount 3 hyd remotes to my YM 3000. One would be the top link, second would be a tilt, third would be a spair. Wondering if anyone here has done it to a YM 3000 or a 2500??? Would be great to get some ideas here on what mounts well and where. A few months back someone mounted spaids on rear of a tiller that made great looking rows. Thinking about makeing the same rig except mounting the spades to a shaft with pillow block bearings. You could mount a cyl to the spade shaft using a crank arm in the center and lower the spades from the tractor seat on the last pass, or when ready. Already have a Howard tiller. Just an idea, first part would be to get three remotes mounted and plumbed. Thinking about buying a hyd 3 point splitter and would most likely need remotes for it as well. Thanks,
Chris

 

[lens12]

A remote can be added in the asame way a loader valve is added. For an explanation on how to do it go to: http://groups.msn.com/SheaffersTownCountryTractors/general.msnw?action=get_message&mview=0&ID_Message=10&LastModified=4675519654363482888