Hello. I recently purchased a BH75 backhoe for my B7800. It came with a subframe also off of a B7800. I think the mmm is suppose to work with the backhoe subframe installed. The problem I have is the lever which sets the mower deck height(at the rear) contacts the subframe when I lift the mower deck. My usual fix would be with a hacksaw, but I figured I'd see if anyone has come across this before I start sawing. I've attached a couple of pictures, one with the lever at normal mowing height, the other with the lever fully forward(rear of deck lowered) The previous owner didn't have a mower deck on his tractor.
Thanks Again
Thanks Again
