model 52 loader...loose?

   / model 52 loader...loose? #1  

v8only

Silver Member
Joined
May 27, 2012
Messages
225
Location
Mb
Tractor
1988 John Deere 755
I have always noticed that when traveling over bumps the loader shakes at the mount arms the vertical post that runs from the fastening point to the loader hinges the part that says "52" (if that makes sense) I have looked to see if anything seems loose but i cant really tell what im looking for as everything seems tight.

Tonight I was working the loader pretty hard digging down 2' into hard clay (till, push and scoop) and i noticed that the loader frame (the posts that say 52) would torque.

Now is this all normal or should it be fairly solid?

thanks?
 
   / model 52 loader...loose? #2  
Now is this all normal or should it be fairly solid?
thanks?

Yes and yes. I have a 4300 with 430 loader. I think the quick attach is pretty similar. When I bought my tractor the loader mounts were very loose and I couldn't find any information on whether they were suposed to be that way or not. I finally found that they are not but it is a common issue. I welded shims to the square post to make the fit tight. It dose not budge now. Here is a link to a relevent post. I don't have pics of my fix yet.

http://www.tractorbynet.com/forums/parts-repairs/249623-repairing-damaged-loose-420-loader.html
 
   / model 52 loader...loose?
  • Thread Starter
#3  
perfect!

thanks.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2011 Ford F-150 4x4 Ext. Cab Pickup Truck (A51692)
2011 Ford F-150...
2018 John Deere 310L 4x4 Extendahoe Loader Backhoe (A52377)
2018 John Deere...
2015 Clarke Power Gen RC60D 47kW Towable Diesel Generator (A50324)
2015 Clarke Power...
JOHN DEERE 6135RW401 MOTOR (A51247)
JOHN DEERE...
JOHN DEERE 5075E (A53084)
JOHN DEERE 5075E...
 
Top