Mf18
- Thread starter Etbluff
- Start date
- Views: 1180
Rebeldad1
Veteran Member
- Joined
- Sep 16, 2009
- Messages
- 1,603
- Location
- Hughett Bend Washington
- Tractor
- Kioti Tractor, John Deere Mower,New Holland Mini Excavator
goto your local implement store and see if one off theirs will fit. or a neighbor.
Sportsman762
Veteran Member
- Joined
- Mar 28, 2008
- Messages
- 1,073
I have a Massey 18 scraper, which was made by Gill for Massey.
I purchased shanks from Quality Farm.
qualityfarmsupply.com
You will need to make retainers to hold the blades in. Below is the post I used as a reference for making my retainers. I would not make them as long as Degolyerent and i did. I would only make them 1-1/2" long instead of 3". Degolyerent says that he thinks 3/4" would work, but I think that's too short.
www.tractorbynet.com
You might also be able to use a spring key like Gannon does. I did not try it, but perhaps should have.
qualityfarmsupply.com
Also you are missing the pin on the rear part of the blade, above the back support. This pin holds the ears together so you do not have the rear brace come free.
I purchased shanks from Quality Farm.
Search: 1 result found for "873-103110*"
When it comes to agricultural implement parts and tractor parts, Quality Farm Supply has the parts you need. We carry everything ranging from Planting Parts to Sprayer Parts to Tillage Parts to Cotton Picker Parts to Tractor Parts to Shop Supplies. Our goal is to make agricultural part shopping...
qualityfarmsupply.com
You will need to make retainers to hold the blades in. Below is the post I used as a reference for making my retainers. I would not make them as long as Degolyerent and i did. I would only make them 1-1/2" long instead of 3". Degolyerent says that he thinks 3/4" would work, but I think that's too short.
I bought the Gill box scraper w/ rollover scarifiers, hinged back blade. It's a load!
This thing is built like a Sherman tank! Everything seems to work as it should. Besides a new steel rod for the handle and a 1" 1/4 pin that holds the scarifir bar to the box (and paint) its a perfect unmolested piece of art. Once I buy scarifirs it won't be quick hitch compatible. The...
www.tractorbynet.com
You might also be able to use a spring key like Gannon does. I did not try it, but perhaps should have.
LOCK KEY
Lock key, scarifier shank. For Gannon and other box scrapers with notched style scarifier.
qualityfarmsupply.com
Also you are missing the pin on the rear part of the blade, above the back support. This pin holds the ears together so you do not have the rear brace come free.
