MF 1433 Parts

[wayne48]

Parking brake on my Massey stopped engaging today. Investigation revealed that the teeth on the brake pedal that the parking brake lever engages had worn down from use.
Temporary fix was to adjust more play in the brakes so that the pb lever could engage good teeth higher up on the brake pedal.
This works but I'm not comfortable with this as a permanent fix.
Permanent fix would be to replace the main brake pedal that has these teeth (left side).
SO all that being said, starting searching on line for the part. After an hour, no joy!
Who has had success at finding parts on line for an MF 1433 and where did you find them?
OR do I just need to bite the bullet and go to my MF dealer for the part?

Thanks for any advice.

 

[teampryor]

How about improvising, overcoming and adapting? Remove the pedal and have a welder or fab shop make a more permanent repair? Surely a beefed up pedal would be better than a replacement that is just going to wear out like the original pedal.

 

[teampryor]

Massey online parts schematics for guests.
http://www.agcopartsbooks.com/PartsBooksN/Viewer/book.aspx?book=agco/651732
Brake pedal set part #4260759M91 Brake pedal set probably pricey though.

AGCO Parts Books
just click view books as guest user.

 

[wayne48]

Point well made teampryor. Talking to a welder now.
Also much thanks for the link to Agco Parts.

Parking brake on my Massey stopped engaging today. Investigation revealed that the teeth on the brake pedal that the parking brake lever engages had worn down from use.
Temporary fix was to adjust more play in the brakes so that the pb lever could engage good teeth higher up on the brake pedal.
This works but I'm not comfortable with this as a permanent fix.
Permanent fix would be to replace the main brake pedal that has these teeth (left side).
SO all that being said, starting searching on line for the part. After an hour, no joy!
Who has had success at finding parts on line for an MF 1433 and where did you find them?
OR do I just need to bite the bullet and go to my MF dealer for the part?

Thanks for any advice.