MECHRON 2200 looking to add tail lights and brakes

[kwg]

Does anyone know which wires are for brake lights and tail lights?

 

[Robin Veerman]

Doesn’t it come with brake/tail lights?

 

[kwg]

Doesn’t it come with brake/tail lights?

Mine is an older one that didn't have them when I bought it.. If it already had them I wouldn't need to know where the wiring is located.

 

[Robin Veerman]

That kind of info would’ve been helpful in your initial request. No need to be pissy….

 

[kwg]

That kind of info would’ve been helpful in your initial request. No need to be pissy….

I didn't mean to be "pissy". I guess I didn't feel I needed to explain why my machine doesn't have the lights. I just thought I could ask where and if there are wires already on machine to hook up to. I found two wires under the front hood that seem to be good for the tail lights but nothing for the brake lights. I guess I read your response thinking you thought the lights were already installed and I just didn't notice them.

 

[bandc07]

I have seen a tail light and turn signal kit on ebay that plugs into the factory harness. I don't think there are any wires unless you had that kit installed previously.

 

[kwg]

I have seen a tail light and turn signal kit on ebay that plugs into the factory harness. I don't think there are any wires unless you had that kit installed previously.

ill look into that. Thanks

 

[ksbrdmkr]

I bought the kit from dealer as installed myself. The wiring harness was hard to find but we're there. The kit had turn signal and horn.

 

[kwg]

I ordered a brake switch off E bay for $27. I'm just going to find a "hot" maybe off the headlights and go through a 12VDC relay for the tail lights