Max 28 100 hour service

mitchash · Apr 28, 2018

It's time for my Max 28 to get its 100 hour service. I have done everything except the hydro/hydraulic oil. I need to find enough pans to collect the 23 quarts of oil. Is there a screen in the transmission that needs to be cleaned? I know the Kubotas at work have a screen. I also found out the front axle takes the same hydraulic oil. When I first bought it the shop said the front axle took 80/90 gear oil. But since we live in the northeast and it gets so cold here the factory recommends using the hydraulic oil in the front axle. I use all the Mahindra oils and filters since it's still under warranty.

doneill127 · Apr 28, 2018

I just use a cheap plastic 30 qt storage container to collect the fluid. Don't know about a screen on the Max 28. Look at the parts diagrams in the attached link. Should be able to see if there's a screen. https://parts.mahindrausa.com/CorporateEPC/Category.aspx

747driver · Apr 28, 2018

My tractor holds 8 gallons. I have 3 drain plugs, drain each rear axle one at a time. Then I drain the main tranny plug. I know its somewhat messy but I drain so much out then quickly put the plug back in just enough to stop the flow. I don't like trying to maneuver a big container around full of oil, plus its easier to put it in the waste oil container.