robbieo11
Silver Member
- Joined
- Jul 2, 2007
- Messages
- 156
- Tractor
- 93 B7100
MAX 25 BACKHOE DEINSTALL AND INSTALL
- Thread starter robbieo11
- Start date
- Views: 1427
LAWALLSTRACTOR
Veteran Member
Nice job, Rob. I am impressed.
OP
robbieo11
Silver Member
- Joined
- Jul 2, 2007
- Messages
- 156
- Tractor
- 93 B7100
Thanks when u all see the vid can u leave a comment and over on utube also thanks
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,998
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Very good video. I considered buying one of those new when I bought my used Kubota B26. The Mahindra looks to be a bit of an ordeal to get off and on with all those pins to align.
I am glad I got the Kubota which comes off with removal of two top pins and disconnect of 2 hydraulic hoses, one of which is simply plugged back into the tractor making a loop so no valves to set for backhoe vs 3 PH. It takes maybe 2 minutes tops to get it off. You do have to install the 3 PH lift arms though as they cant be on when using the backhoe so another 5 minutes for that.
I am glad I got the Kubota which comes off with removal of two top pins and disconnect of 2 hydraulic hoses, one of which is simply plugged back into the tractor making a loop so no valves to set for backhoe vs 3 PH. It takes maybe 2 minutes tops to get it off. You do have to install the 3 PH lift arms though as they cant be on when using the backhoe so another 5 minutes for that.
LAWALLSTRACTOR
Veteran Member
That 2nd set of pins, is just to hold up the 3ph arms so you don't have to remove them, they have no structural purpose.
