Massey 1740M code

[Ccdteacher]

I have a 1740 M with 49 hours. I was looking at the dash gauge and noticed either a lower case o or 0 followed by FF. Has anyone seen this before?

 

[homesteader13]

Do you have the operators manual in the pocket on the seatback?
I'm in Montana and my tractor is in Nebraska right now so i cant look it up, but the codes are in there.
50 hour service maybe. I know they get their first oil change at 50 hours, to soon for a FF fuel filter, unless its different than the 1742 and 1755

 

[Ccdteacher]

Yes, I looked in the owners manual today and could not find that code.

 

[homesteader13]

Have you had any fuses out recently?

 

[homesteader13]

Is it on the top part of the screen or middle, lower?
Turns out I actually have the repair manual CD with me in my laptop for that tractor can you post a picture of the screen?

 

[homesteader13]

Is it on the top part of the screen or middle, lower?
Turns out I actually have the repair manual CD with me in my laptop for that tractor can you post a picture of the screen?

Position 1 or 2?
Did you scroll through the screen button to see if there are any other codes or messages?

 

[Ccdteacher]

I am out of town but will be back on Friday. The code is in the middle of the screen, position 2. I will take a picture when I get back. Also, I did not know that you could scroll thru the screens

 

[homesteader13]

Ok, Let me know when you get back.
I am heading back from Montana to Nebraska on weds, will be back thurs.
The display button to the left of the dash scrolls through diffrent functions on the screen, if there is more than one code it will show up when you push it.
(Posted a picture description for you)

 

[mkdevore]

I think this is telling you the PTO is off. When you push the black square button to the left below the screen, it will switch between PTO speed and Ground speed. If it says OFF, it means the PTO is off. Trying pushing the black button to see if it switches the display to ground speed.

 

[homesteader13]

I think this is telling you the PTO is off. When you push the black square button to the left below the screen, it will switch between PTO speed and Ground speed. If it says OFF, it means the PTO is off. Trying pushing the black button to see if it switches the display to ground speed.

I believe you are correct.

 

[ronT]

I have a 1740 M with 49 hours. I was looking at the dash gauge and noticed either a lower case o or 0 followed by FF. Has anyone seen this before?

I have a 1755m recently purchased and it shows "OFF" unless I engage the pto. Black display button lower left does nothing. Was told that Display Button feature only works on a HST not a Power Shuttle that I have.

 

[homesteader13]

I have a 1755m recently purchased and it shows "OFF" unless I engage the pto. Black display button lower left does nothing. Was told that Display Button feature only works on a HST not a Power Shuttle that I have.

On my 1742 with power shuttle it would scroll through the 2 screens and also show you any active codes.
My 1755 with HST works the same way.
Both are cab models.

 

[Ccdteacher]

Thanks you for the information. Ours is a HST. Does that mean each time I am going to have to push the black button to get to the MPR?

 

[homesteader13]

Thanks you for the information. Ours is a HST. Does that mean each time I am going to have to push the black button to get to the MPR?

You should not, it should default if you have it on MPH when you shut it off and turn it back on.

 

[Ccdteacher]

You were correct, it was for the PTO. I had to push the little black button to get to the MPH screen.
Thank you for your help