Maintenance Questions

   / Maintenance Questions #11  
My loader manual says grease every 10 hours. I generally grease once a month.
 
   / Maintenance Questions #12  
My loader manual says grease every 10 hours. I generally grease once a month.
As long as you clock in 10 hours per month, you're good.

Remember the bouncing across a field = loader work hours = Pin Wear. Those pins are under pressure as you drive and bounce around. There's no cushioning, so if it's metal on metal, there will be wear.
 
   / Maintenance Questions #17  
Lock and lube tip was a real game changer especially for the zerks in hard to reach places. I keep a grease rag near the grease gun to wipe off the zerks before greasing and to clean up if I get too enthusiastic.
A grease gun is a must if you own a tractor!
 

Tractor & Equipment Auctions

2014 Toro Groundsmaster 4500D 5- Deck 4WD Rotary Commercial Mower (A56857)
2014 Toro...
2000 Cummins DGDB 100kW Standby Diesel Generator (A56857)
2000 Cummins DGDB...
(2) METAL & WOOD STORAGE RACKS (A52708)
(2) METAL & WOOD...
2003 International 7400 T/A Heil 12 CuYd Dump Truck (A55853)
2003 International...
2014 Nissan Pathfinder Multipurpose Vehicle (MPV), VIN # 5N1AR2MNXEC713906 (A56859)
2014 Nissan...
2007 Ford F-350 9ft. Stakebody Flatbed Truck (A55852)
2007 Ford F-350...
 
Top