Maintenance Questions

/ Maintenance Questions #11  
My loader manual says grease every 10 hours. I generally grease once a month.
 
/ Maintenance Questions #12  
My loader manual says grease every 10 hours. I generally grease once a month.
As long as you clock in 10 hours per month, you're good.

Remember the bouncing across a field = loader work hours = Pin Wear. Those pins are under pressure as you drive and bounce around. There's no cushioning, so if it's metal on metal, there will be wear.
 
/ Maintenance Questions #17  
Lock and lube tip was a real game changer especially for the zerks in hard to reach places. I keep a grease rag near the grease gun to wipe off the zerks before greasing and to clean up if I get too enthusiastic.
A grease gun is a must if you own a tractor!
 

Marketplace Items

2007 Frienghtliner B2 School Bus (A59230)
2007 Frienghtliner...
Bulk Lot of over 600 NEW Motorcycle Sprockets - 1980s to Present (A61307)
Bulk Lot of over...
SKID STEER ATTACHMENT PICKER (A58214)
SKID STEER...
2018 CATERPILLAR 336F L (A58214)
2018 CATERPILLAR...
Rhino DB150 (A57148)
Rhino DB150 (A57148)
2012 Chevrolet Camaro Coupe (A59231)
2012 Chevrolet...
 
Top