Mahindra 6075 only goes in reverse

[arrow]

Ok. Ty

Looking at your pic, you may be on the top fuse box because that’s where the fuse puller is as labeled . Unless the 75 is different from the 65 we have
The bottom fuse box on a cabbed model is at your feet. Thats where the reset fuse should be.

 

[MP3]

I have a 2018 Mahindra 6065. I had a similar problem, it would only move in reverse no matter what I did with the power shuttle lever. I had a small hydraulic leak in a fitting and it started working again after topping up the fluid.

The 6000 series also had an issue with the transmission housing being milled incorrectly, which caused hard shifting. I had mine fixed under warranty service.

 

[arrow]

Ok. Ty

So when I got back, I found that the 65 we had was picked up.
It was sitting on our lot for 3 months and the week I'm gone, it gets sold.
I am very sorry not to be able to make this comparison for you as to location of re-set fuse.
On the 65, it was at the floor mounted box and the third fuse from the left labeled "re-set"
The 75 could be in a different location.
Again, my apologies.